Carprog v8.21 and v8.09 online ........experience

[nebojsapejcic]

I bought this tool just for fun and I am trying it on different cars. It s CLONE
Maybe we can share some experience on new update regarding mileage correction.

Focus 2008 ....ok
Cmax 2010 ....ok
opel many ecu(bensin and diesel) ....ok
Insignia , Astra 2010 .... error connection
Fiat croma, punto, bravo...ok
Passat b6 2007....ok

Did anyone try MB Assyst via obd2 ?
Also Japanese via obd?

[joekoka]

Did you try any airbags??
And what have you got ,
original or clone ,, ?


Sent from my iPhone using Tapatalk

[nebojsapejcic]

it is clone

[kizagt]

Older RENAULT cluster (Megane, Senic,Thalia) with NEC chip inside done by cluster conector with 3 wires ;)

[antenor]

I bought this tool just for fun and I am trying it on different cars. It s CLONE
Maybe we can share some experience on new update regarding mileage correction.

Focus 2008 ....ok
Cmax 2010 ....ok
opel many ecu(bensin and diesel) ....ok
Insignia , Astra 2010 .... error connection
Fiat croma, punto, bravo...ok
Passat b6 2007....ok

Did anyone try MB Assyst via obd2 ?
Also Japanese via obd?


Where you bought your CARPROG?
Clone only against version 7.28 where can I find the INTAL Monthly Newsletter 8:21 ??

[joekoka]

it is clone

Where did you get it from?


Sent from my iPhone using Tapatalk

[solar]

try google something like......carprog v8.21 and v8.09 online.......maybe able to find even newer:)

[bodzio012]

All ok but all of them what you write done usualy caprog clon 5.46

[dr boss]

hyundai i20 2014 obd...........ok

[markony79]

use their promotion now, and make it like original carprog with full version

its not expencive now

http://codecard.lt/carprog/carprog-clone-legalization/carprog-clone-legalization-to-original-carprog-full-version/prod_1005.html

700eu , clone to original full version

[tango]

use their promotion now, and make it like original carprog with full version

its not expencive now

http://codecard.lt/carprog/carprog-clone-legalization/carprog-clone-legalization-to-original-carprog-full-version/prod_1005.html

700eu , clone to original full version

but 700eu is some peoples monthly wage so not cheap really

[javyb]

but 700eu is some peoples monthly wage so not cheap really
Well considering the developer has to buy dash to test on it is. Those whose monthly wage is 700 shouldn't buy it

[krpic]

polo 2014 read dash --fail
octavia ----2007 read immodata fail
skoda fabia clear airbag by 3 wires ok
clio3 2006 dash with 24c04 always change to 137000 0r 131000km cant remember :) by obd..

[electrones]

use their promotion now, and make it like original carprog with full version

its not expencive now

http://codecard.lt/carprog/carprog-clone-legalization/carprog-clone-legalization-to-original-carprog-full-version/prod_1005.html

700eu , clone to original full version

I do not think is safe this conversion, clone to become orig.
Orig. is orig. always, become the clone to orig. you can have consequences or not depends on luck
best way for me, is get orig

Cheers

[tango]

Well considering the developer has to buy dash to test on it is. Those whose monthly wage is 700 shouldn't buy it

obviously original would be best to get but i was just stating that 700euros isnt cheap and this topic was about clone not supporting the developers, if everyone could afford to buy original equipment then there would be no reason for forums like this 1
most people either start off with clones or use clones at all times.
and this isnt just for car equipment

[spidometr1973]

http://www.ebay.com/itm/carprog-v8-64-repair-Tune-ECU-Airbag-Odometer-Radio-Mileage-Dashboard-Immo-/322063682347?hash=item4afc7dcb2b:g:vcAAAOSwQYZW0dj W&item=322063682347&vxp=mtr

[qwert3433]

Online work?

[Lexas]

I do not think is safe this conversion, clone to become orig.
Orig. is orig. always, become the clone to orig. you can have consequences or not depends on luck
best way for me, is get orig

Cheers
to be honest, my friend has original carprog. he had already sent it to codecard for repair 3 times and it still not working properly. And my clone working for years without any hardware issues, one problem, not all functions working and no A+ cable...

[juancho18]

coleccion carprog

[dr boss]

astra IV , insignia , octavia 2011 JC online work

[BITZU]

And dont forget hardware still remaine the same: china low buget clone, invest money in a better way.my clone works a few time and then nothing at all.

[alkaskad]

Started with clone 4.01, after that bougt 4.74 clone and after a year i bought original dashboard pack. I use both because clone is good for some airbags and opel ecu via obd...it's pretty good tool and i recommend to buy original pack for work that you mostly do... My wage is below 700€ :)

[ubistvo]

Work fine for Renault Scenic,Laguna,Megane... dash with HC08 and NEC procesors with A10 cable without disamble the dash. Work 100%
Megane 1995-1999 Key 100% work
VW Passat 2008 Km 100% work
Opel ECU all work fine
NOT work with VW ECU
CarProg with 4.74 sofware

[BrunoXme]

@ubistvo
Clone or original?

[tango]

@ubistvo
Clone or original?
seeing he says software 4.74 then i would guess at it being a clone
otherwise he would be saying higher software :)

[javyb]

Anyone tried the Nissan qashqai by obd option for the 9s12 dash?

Sent from my SM-G935F using Tapatalk

[mikroel]

what about V9.31? what is difference in functions between 9.31 and online 8.21??
on the producer web site they offer 9.31 too

[digimile]

hi
china carprog clone 8.21 is work good on all options all are active....
but need to test on dash...no option is N/A all are active
thanks

[Brayn]

8.21 not counting. Old version have limited time

Sent from my C5502 using Tapatalk

[kizagt]

8.21 not counting. Old version have limited time

Sent from my C5502 using Tapatalk

my carprog 8.21 start counting

[Brayn]

my carprog 8.21 start counting
When you install software that asked key code? Because 8.21 need online activation
If you install and put key code, not should be start to count

Sent from my C5502 using Tapatalk

[kizagt]

When you install software that asked key code? Because 8.21 need online activation
If you install and put key code, not should be start to count

Sent from my C5502 using Tapatalk

we do same like you say, now we flash unit again i report if start counter again..

[Brayn]

Ok..

Sent from my C5502 using Tapatalk

[javyb]

my carprog 8.21 start counting
How many times have you used it?

Sent from my SM-G935F using Tapatalk

[kizagt]

How many times have you used it?

Sent from my SM-G935F using Tapatalk
I didn count :-D
Lot of times, to bad i didnt make photo.

Послато са D6503 уз помоћ Тапатока

[digimile]

hi
hyundia i20 with nec+c56 read km correct but could not write back eeprom backup at dash plug ok but not write....
any solution welcome...????
thanks

[nebojsapejcic]

After many cars that I tried I can say that this tool is garbage.

[albertros]

I have genuine an many clones. Why have I many clones you ask, well they go duff a lot easier than the genuine and sometimes I havn't just time to repair untill later. 2nd they cost buttons.
If the clone menu is activated it works the same as the genuine.
The latest v8.21 comes with v9.31
v9.31 does not work at all because the lib file has the wrong serial number. v8.21 works because the lib file has the correct serial number.
Bought from cardiag.co.uk with over 70 sold this could not have been news to them when they took my order.

[einet]

bay original, try to bay by a promotion.
I have make this.

I say all, not by any clone from some that ask for $.
Think, today you give 200€ or 300 or 150 next you only can work 50%
after another year another 150€ this make 600€! original cost 700€.

[digimile]

hi
anybody try power up dash with 12v adapter and put mbus wire from clone for nec_+56 and try read write is this work or not ????
thanks

[javyb]

hi
anybody try power up dash with 12v adapter and put mbus wire from clone for nec_+56 and try read write is this work or not ????
thanks
Have you reworked your carprog?

Sent from my SM-G935F using Tapatalk

[paul_12345]

bay original, try to bay by a promotion.
I have make this.

I say all, not by any clone from some that ask for $.
Think, today you give 200€ or 300 or 150 next you only can work 50%
after another year another 150€ this make 600€! original cost 700€.

But with the original you pay full this year, then to keep upto date you have to buy full again next year or pay more for the seperate updates.. so your numbers dont add up.

[albertros]

Hi,
DIGIMILE - you are using the adaptor D1?

[digimile]

hi
yes D1 adapter + A15 cable it read ok but when we try write it start write but fails...any solution welcome
thanks

[javyb]

hi
yes D1 adapter + A15 cable it read ok but when we try write it start write but fails...any solution welcome
thanks
Use stronger power supply

Sent from my SM-G935F using Tapatalk

[danwbb]

Does the version 8.21 clone work with windows 7 and above? or just windows xp?

[lupu_sandu]

Work with any version of windows

[digimile]

strong power supply means 12 volt to dash ????

[javyb]

strong power supply means 12 volt to dash ????
To carprog unit also has your unit been reworked

Sent from my SM-G935F using Tapatalk

[albertros]

Does the version 8.21 clone work with windows 7 and above? or just windows xp?

Hi,
Mine came with 9.31 and 8.21 (suspect slightly different clones of 8.21)
my 8.21 runs on win 7

[digimile]

To carprog unit also has your unit been reworked

Sent from my SM-G935F using Tapatalk

hi my unit is not reworked i buy from gocardiag i try give 12v to carprog and then d1+a15 adapter power supply to dash from a15 it read ok but dosenot write.....have any solution ?????
thanks

[javyb]

hi my unit is not reworked i buy from gocardiag i try give 12v to carprog and then d1+a15 adapter power supply to dash from a15 it read ok but dosenot write.....have any solution ?????
thanks
I think you should rework it first

Sent from my SM-G935F using Tapatalk

[digimile]

hi
rework ???? what to rework ???

[janake]

what about V9.31? what is difference in functions between 9.31 and online 8.21??
on the producer web site they offer 9.31 too

Difference between carprog v7.28,v8.21 and v9.31
http://goo.gl/MnJQDQ

[mikroel]

Difference between carprog v7.28,v8.21 and v9.31
http://goo.gl/MnJQDQ

I saw that before but can't see what are difference exactly .
I have clone V9.31 and as i can see many options are n/a. In clone ver. 8.21 all options are open ? Autodetect option is open too?


Sent from my iPhone using Tapatalk

[kikiduquatrevingtdouze]

i buy carprog on aliexpress it is not very expensive http://fr.aliexpress.com/item/New-Carprog-V7-28-Main-Unit-Carprog-Without-Cables-Adapters-Car-Prog-For-Car-Radios-Odometers/32512205970.html?spm=2114.06010108.3.49.AiJ3i8&ws_ab_test=searchweb201556_10,searchweb201602_1_10 037_10017_405_507_10032,searchweb201603_7&btsid=f0716102-f12f-47a8-bf92-fa1dadbc9200

i can read the 95020 eeprom desolder from the dash but can't write

[crazylou2017]

I have genuine an many clones. Why have I many clones you ask, well they go duff a lot easier than the genuine and sometimes I havn't just time to repair untill later. 2nd they cost buttons.
If the clone menu is activated it works the same as the genuine.
The latest v8.21 comes with v9.31
v9.31 does not work at all because the lib file has the wrong serial number. v8.21 works because the lib file has the correct serial number.
Bought from cardiag.co.uk with over 70 sold this could not have been news to them when they took my order.

Try to download v9.31 software from chinaautodiag, the problem will be solved.

[mondeo130]

hello
have you firmware 8.21
thank

[mikroel]

Renault clio airbag ,direct or diag ,working or not with online 8.21????


Sent from my iPhone using Tapatalk

[bursuc]

CARPROG 8.09 online version
Renault dash emulator --- OK

Sent from my SM-G928F using Tapatalk

[bursuc]

https://uploads.tapatalk-cdn.com/20170331/37c3b4e15894792a6defacf1544e0971.jpg

[alfona156]

ML 320 2000 ok with CLIP A6 NO DESOLDER (dash) - someone have solution for odometer correction ECU and min Airbag for this car?
panda 07 bipower gpl (2010) OBD only A1 no FIAT adapter (dash) ok - iaw4 n/a someone have solution for odometer correction ECU and min Airbag for this car?
bravo 07 1.6 mjt (2009) OBD only A1 no FIAT adapter (dash) ok - edc16c39 active but not work!!!! someone have solution for odometer correction ECU and min Airbag for this car?

I have tryed carprog 8.09, 8.21 online active, 9.31 but not work with ecu



If ECU virginize what happens to ECU odometer km?
If airbags clear crash data what happens to the minutes?