citroen c5 mileage help to connect

[enagize91]

heey how do i connect to this cluster i need to change mileage.
364540

[Johnner]

You hook up to that 908 processor in front of you...Look up the archives here for the pin outs and security bytes...

Then yer gonna have to pull the BSI,and change the 95128 in there !!

Have fun !!

[enagize91]

can you find a link?
i use digimaster 3

[enagize91]

anyone who can help to find out how to do this with a digimaster

[antenor]

Take a look at this guide and adapted to the Digimaster

[enagize91]

hmm that look good. but i really dont know how i should read it from digimaster. under c5 there is only another cluster.

[Johnner]

Mate,have you not got an Eeprom programmer ?

[enagize91]

only to digimaster

[antenor]

You have manual Digimaster?

[enagize91]

meybe i found out.
if i go under cpu program i can program mc68hc908az32 and the one in cluster is HC908AZ32 is that the right way?

[Johnner]

That's what I told you in another thread earlier...You will also need security bytes for this processor...

[antenor]

I d'not know the digimaster, but if we have no other option reads with the CPU option.
But you must have the menu to go by car model!
You have to better study your digimaster ...

[enagize91]

antenor the picture you send, i cant connect that way. yes i can go to a car model but when i go to citroen c5 there is only on kind of cluster to adjust and its that that kind of cluster i have

[kizagt]

antenor the picture you send, i cant connect that way. yes i can go to a car model but when i go to citroen c5 there is only on kind of cluster to adjust and its that that kind of cluster i have

Do you have Carprog? You can do cluster with him