PDA

View Full Version : A need orginal file W211 E280CDi please help



seba_m_
19th March, 2016, 04:41 PM
A need orginal file W211 E280CDi please help

SW: 1037390842
HW: 0044465340
EDC16CP31

Thanks

mihaiservice
19th March, 2016, 04:49 PM
What kind of trouble are with original sw ? i have a lot of files from 2.8CDI but this sw are missing !
Upload file and i will try to repair !

seba_m_
19th March, 2016, 06:02 PM
The problem is that someone deleted dpf . I see that is made ATR software . There is a problem with the exhaust gas pressure sensor error P2089 . Exclusion error switch without success .

mihaiservice
19th March, 2016, 06:26 PM
For sure that file dont was from ATR !

seba_m_
20th March, 2016, 10:09 AM
File......

mihaiservice
20th March, 2016, 11:46 AM
That car(file) are wihout dpf pipe from factory !!! did you have see any dpf pipe ?

seba_m_
20th March, 2016, 05:42 PM
It looks like he had a pipe dpf. It is the year 2007. The car was imported from Italy and in those years the cars were manufactured in Europe with DPF. If there is no DPF is why the exhaust gas pressure sensor and the error P2089 ?? Attached is also a file with error P2089 off by a local tuner. Can someone check if the tuner is well done?

mihaiservice
20th March, 2016, 06:27 PM
Back pressure sensor it not related to dpf ! also in Europe a lot of W211 also W164 until 2008 without DPF !

seba_m_
20th March, 2016, 06:47 PM
I did not know. mihaiservice you can check whether this error is correctly turned off?

mihaiservice
21st March, 2016, 01:10 AM
Even if dtc are correctly turned off still cant get full power after 80km/h !

boomeer
21st March, 2016, 07:43 AM
Try delete full specification for this error I think must work

seba_m_
21st March, 2016, 10:16 AM
Symptom is this. How was one mistake p2089 car starts. Now there are two errors P2089 and you need to shoot 12 to 15 times. Overall very hard to start. The car for these errors is in Safe Mode and hard drives. Help someone correctly remove the error from the table DTC? Then I check catalyst because I have a suspicion that it is clogged.

seba_m_
21st March, 2016, 11:20 AM
There is someone so good and can turn off properly this error P2089? Haunts me this error and the local tuner says that the error is well off. The original charge and the disabled is a mistake to post above.

boomeer
21st March, 2016, 02:39 PM
try this file
pass in PM

seba_m_
21st March, 2016, 08:40 PM
Thanks. I'll check tomorrow and give a report.

sazimam11
25th April, 2017, 10:06 PM
Unfortunatelly , you have forgot to give back the report as promissed ... worked well ?