View Full Version : W204
Triniguy
20th March, 2016, 10:15 PM
Hi there
does anybody have any experience with digi3 clone to program W204 via OBD??
Or better program 24c128 and EZS manual. Not with clone of course............................
Thanks in advance
waldi1979
20th March, 2016, 10:29 PM
Digi does it well via OBD.
W204 with NEC in EZS need CanBlocker or replace EZS+ESL.
Triniguy
20th March, 2016, 10:43 PM
I will try digi3 via OBD first. If it not changing will program manually with rosfar.
Thanks
MarkPRP
20th March, 2016, 10:53 PM
You won't be changing anything on a w204 with Rosfar that's for sure
Sent from my iPhone using Tapatalk
Triniguy
21st March, 2016, 12:00 AM
ok, have the can filter.
Thanks much
XmoDDeR
21st March, 2016, 12:40 AM
use digi and set software block......................................... or do dash manual and use can filter
the choice is urs
XmoDDeR
22nd March, 2016, 10:37 PM
did one today DP4 rough for a min but complete
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.