peugeot 308 dashboard and bsi correcting km

[haykojan99]

i have Peugeot 308 automatic , the dashboard was broken and have changed with another, but it was secondhand piece and the km was 200 000 and my car 106 000 km so that has changed to 200 000 i have the read files. can someone correct it for me?

[jomberykaso]

here are your files with 106.000 kms.

Good Luck!

[haykojan99]

I have verify error

[nikz]

dump bsi jomberykaso (http://www.digital-kaos.co.uk/forums/member.php/390353-jomberykaso) ok
dump dash jomberykaso (http://www.digital-kaos.co.uk/forums/member.php/390353-jomberykaso) bad
dump dash ok

[jomberykaso]

is really my file bad?

[bulanbulanov]

is really my file bad?

really bad !!

4B 97 1E 00 B4 68 E1 FF 2C 97 1E 00 D3 68 E1 FF --ori km

(00 1E 97 4B)/0A =>dec 200481Km
(FF E1 68 B4) XOR (FF FF FF FF) = 00 1E 97 4B

A0 2C 10 23 A0 2C 10 23 A0 2C 10 23 A0 2C 10 23 -- your file

[haykojan99]

ok thank you , but i dont understand why 2 files for bsi ? with history reset and without ? where is the diference

[pagautas]

file with history reset have all error history cleared. so if you have an error on 200.008 km and you won't clear history it could be readed later using lexia.

[haykojan99]

ok i have another question please . i have another bsi ok, the reference is ok but i need to clone it so this file you are sendme and i trying to whrite it but my xprog say error verify , yes to continue or no . i dont know what to do ? is this problem of xprog ?

[haykojan99]

to clonate the pin code of my bsi 966405908002 what memory i have to read?

[antenor]

BSI EEprom

[haykojan99]

it have 2 memorys to clonate? or only 1

[nikz]

bsi 95128 pin=A9MQ

[antenor]

367040
Thats your PIN location.:chuncky:

[nikz]

367040
Thats your PIN location.:chuncky:

this pin location good

[haykojan99]

thank you guys , look i have clonet the eeprom st95128 the car was started the km 106000 in dash so that is cool ! thankyou , but not evrything is working becouse the windows does not rise,clima control not work and the central lock not opening. i think the car have this problems becouse, i had to clonate more memorys not only the eeprom ! please say me how can repair this ?

[dunnnia]

Hi,you need recode BSI with Lexia.Doors control,clima and etc.

[haykojan99]

ok i have recoded all but , i have one problem with the gear shifts is semi automatic egc , when i starting the car is going back in neutral position do you know how to solution this fail ?