PDA

View Full Version : Peugeot 1.4hdi EDC16C34 - DTC P1160 AIR FLOW plausibility



wld
22nd March, 2016, 09:11 PM
I'm working on remapping a tiny 1.4hdi with bigger turbo and intercooler. Goal is at least 125HP and over 250Nm.
Everything is OK, the power is present, but when upping turbo pressure to ~1.3bar to clear the smoke it throws DTC P1160 - Air Flow not plausible, with over 900mg/cp.
Is there a single value for max air flow, or a plausibility map?
I've tried comparing with 1.6 110HP software but without results.
Thank you for any hints.

Stock dump attached.365340

Yura123
22nd March, 2016, 09:16 PM
check EGR or air leak after turbo

wld
22nd March, 2016, 09:22 PM
EGR is off and completely removed.
No air leaks.
With stock turbo, no problem with 1.4bar. With bigger turbo no problem with 1.2bar and airflow under 900mg/cp

wld
22nd March, 2016, 11:02 PM
I think i just found the culprit !
There is a 12x1 Max plausible air mass map.