PDA

View Full Version : VW MP9 Immo off 24c02



jakesman
23rd March, 2016, 05:40 PM
i have vw golf 1.4 with MP9 ecu tried a few immo off files on the 24c02 eeprom but no luck , there is no immo box in the car it was a old golf and i put another engine in with the mp9 ecu , i test the ecu on another car also converted to mp9 , i do not have a programmer that can read the 87c510 (UV)eprom i post the original eeprom file from the 24c02 it is a NSC chip and read it as NM24c02 with tl866a
any help to immo off it , no files i get from the forum works
365522

weza247
24th March, 2016, 03:24 PM
Hi, did you come right with the file to start the vehicle?
I might have an immo off file to assist you.

electrones
24th March, 2016, 05:50 PM
Hi friend
Here u are MP9 totoal immo off, check for immobox carefully if it?s plugged car doesn?t start
Cheers

Pass:electronesvag don?t forget to press thanks button

Cheers

jakesman
24th March, 2016, 07:13 PM
strange when i try other files it do not start and when i hook up vas5054 on the ecu on the table i get "engine module blocked" so immo is on and when i use
VAG MP9 24C02 TOTAL IMMO OFF.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365754&d=1458838266) that error is gone but the car still not start i try it on another car also not start , there is no immo box and nothing connected to the k-line on the ecu , this must be immo off , i am starting to think the box have a faulty component

Ebie
24th March, 2016, 09:07 PM
Hi friend I have immo of for you
Send me email address

jakesman
30th March, 2016, 06:09 AM
solved mr electrones (http://www.digital-kaos.co.uk/forums/member.php/299784-electrones)
your file was correct
problem was on wiring it starts thanx to all

2quickec
7th September, 2017, 10:46 AM
strange when i try other files it do not start and when i hook up vas5054 on the ecu on the table i get "engine module blocked" so immo is on and when i use
VAG MP9 24C02 TOTAL IMMO OFF.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365754&d=1458838266) that error is gone but the car still not start i try it on another car also not start , there is no immo box and nothing connected to the k-line on the ecu , this must be immo off , i am starting to think the box have a faulty component
What is the password for the file please.

eriko
27th May, 2020, 10:22 AM
Very big thanks!!!The car start !!it's been bad for two years!!

canontronic
9th July, 2021, 11:39 AM
Thanks electrones (http://www.digital-kaos.co.uk/forums/member.php/299784-electrones) Polo 1.4 Working fine!!

Cirrus Works
13th October, 2021, 03:01 PM
Thanks electrones (http://www.digital-kaos.co.uk/forums/member.php/299784-electrones) Polo 1.4 Working fine!!

may I have the immo off dump please :adore:

Cirrus Works
13th October, 2021, 03:10 PM
Hi friend I have immo of for you
Send me email address

Good day may I have immo off file for MP9 1.4 6ks 906 258