View Full Version : Audi Q7 2006 EDC16cp34 DPF off
pepi
24th March, 2016, 07:46 PM
Please some one check if this files is ok , I have made DPF off online with original AVDI .
I want to make sure because car is far away from me.Dump is read with KESSv2.
SW: 1037383723
Engine: 3.0L V6TDI
SW upg.: 4L0910401K 0030
If not please correct it for me .
Thanks in advance.
boomeer
24th March, 2016, 07:59 PM
:hmmmm::hmmmm::hmmmm::hmmmm: like VOLTA 80% dtc mask deleted.
lucim12
24th March, 2016, 08:26 PM
Here you have correct dpf off
pepi
25th March, 2016, 01:26 PM
Hello ,
I have glow plug lighting ,poor acceleration and this dtc
Address 01: Engine Labels: Redir Fail!
Control Module Part Number: 4L0 910 401 K HW: 4L0 907 401
Component and/or Version: 3.0L V6TDI G001AG 0030
Software Coding: 0011775
Work Shop Code: WSC 80093 222 69422
1 Fault Found:
049921 - Software Incompatibility with Engine Control Module
U0301 - 003 - Mechanical Failure - MIL ON
mariusica_boy
25th March, 2016, 01:57 PM
Hello ,
I have glow plug lighting ,poor acceleration and this dtc
Address 01: Engine Labels: Redir Fail!
Control Module Part Number: 4L0 910 401 K HW: 4L0 907 401
Component and/or Version: 3.0L V6TDI G001AG 0030
Software Coding: 0011775
Work Shop Code: WSC 80093 222 69422
1 Fault Found:
049921 - Software Incompatibility with Engine Control Module
U0301 - 003 - Mechanical Failure - MIL ON
You need disconnect all sensor on DPF then the error disappear...
CustomCars
25th March, 2016, 03:28 PM
Not all sensors... enough plug Temperature sensor.
Anyway can make it totally different way without any disconnections.
But owner should be happy get it for free anyway :D
AVDI... nice mess ! but better for others.
pepi
25th March, 2016, 04:48 PM
Solved with another map .
Sent from my SM-G925F using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.