View Full Version : Golf 5 pin from dump - 1K0 920 851 A - year 2005
szkeptmen
25th March, 2016, 01:26 AM
Need a little help to find the pin code...
VDO - 1K0 920 851 A
24LC32
Soft 0003103
THX
dustin2014
25th March, 2016, 01:32 AM
Need a little help to find the pin code...
VDO - 1K0 920 851 A
24LC32
Soft 0003103
THX
Hi
Your Pin is 39117
godfathertre
25th March, 2016, 06:57 PM
i tought pin only four numbers on vw is this correct.
szkeptmen
25th March, 2016, 10:48 PM
Hi
Your Pin is 39117
Are you sure ?
Faraday
26th March, 2016, 08:43 AM
your dash 237632km?
dustin2014
26th March, 2016, 01:46 PM
Can be 4 or 5 digit
dustin2014
26th March, 2016, 01:49 PM
366081
your dump
Are you sure ?
szkeptmen
26th March, 2016, 09:57 PM
your dash 237632km?
Yes... Correct mileage calc :)
szkeptmen
26th March, 2016, 10:02 PM
OK.
It's a surprise me that three keys has been programmed ...
Customer has only one key, and like to a spare one.
szkeptmen
6th April, 2016, 09:54 PM
Hi
Your Pin is 39117
Wrong pin, the ecu doesn't accept this code...
Someone tell me the right code, please...
THX
Weasel3
6th April, 2016, 10:02 PM
Maybe it would be a solution to try to get some info out of the Engine ECU. To compare etc.
klesk1986
6th April, 2016, 10:12 PM
Try do it in another way. For example ZedFull has got option to add key without PIN (and in token systems it is very cheap) - there you got transponder ID48 CAN without precoding .Maybe VAG Tacho (i think about some newer clone) has also that option.
p1et
6th April, 2016, 10:37 PM
Use SBB, 1 minute job to add key without pin code.
szkeptmen
6th April, 2016, 11:00 PM
I have T-300 , it can also ?
sbtriny
6th April, 2016, 11:05 PM
Use SBB, 1 minute job to add key without pin code.
hi, m8
do you have a original sbb?
it can wotk without pincode?
please, let me know
thank yoy
p1et
6th April, 2016, 11:11 PM
Original, not original - it's the same... All function of original work in cloned version. You can add key without pin code to VAG cars on canbus system which does not require precoding for VIN number. I love it.
And for T300, i don't know...
szkeptmen
6th April, 2016, 11:39 PM
Good news (to me) cheap tool...
Maybe I purchase one...
szkeptmen
7th April, 2016, 12:28 PM
Tried with T-300, it asks for code :(
Better to buy SBB...
godfathertre
7th April, 2016, 12:42 PM
is it safe to do so or not with sbb are you sure cant corrupt ecu.
szkeptmen
7th April, 2016, 11:27 PM
I'm don't think, no one can calculate correct pin code...
The ecu refused the given pin...
I like clear old keys and program an existing one + a spare key...
THX
yugo45
8th April, 2016, 06:10 AM
If you planing to work on Vw cars after 2005 and up you need to spend some money on good tool like X-Dash form SMOK , AVDI or VVDI.
All other tools is Micky Mouse tool .
szkeptmen
9th April, 2016, 10:46 PM
Yes, you are right ! But...
I'm don't planning to became locksmith... only I need programming a few keys in a year...
So, if someone can calculate the correct pin... I will be glad.
THX
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.