PDA

View Full Version : CMD FLASH vs KESS V2 vs FG technology original tools ... help



zziad
25th March, 2016, 08:08 PM
hi to all
i need to buy new original tool but i need Advice from users DK of this tools

i prefere to read ecus with obd2 !

CMD flash
KESS V2
FG technology
magpro X17

I WORK with vag car, mercedes car

best regards

svvag2000
25th March, 2016, 08:31 PM
FG technology

lucim12
25th March, 2016, 08:37 PM
Kess v2 wold be ok for obd

LaraVAG
25th March, 2016, 10:45 PM
Galletto have the best price and you have all protocol

zziad
25th March, 2016, 11:15 PM
thank you all for replay

plz can you post tested liste of ECUs read by obd with fg technology , KESS V2

regards

CustomCars
26th March, 2016, 09:22 AM
nope nope nope.

CMD flash / X17

then maybe byte shooter.
FG make many issue. With upper two no problems.

bobolin4o
26th March, 2016, 10:32 AM
CMD have issues too (wrong checksum, and you can't disable the tool to make it!), and when you ask their support "Why?"... the answer is always "the problem is in the file"...

ecumix
26th March, 2016, 12:42 PM
Recently also I wondered what to choose fg,magpro x17 , cmd ,kess v2 if you have use this only cars obd i decide buy magpro x17 and I chose well.

LaraVAG
26th March, 2016, 12:46 PM
MAgpro x17 done only new car

CustomCars
26th March, 2016, 01:45 PM
In fact at market no 100% perfect tools....
Anyway i will be recommend CMD it's great tool. Many customer use it and very low problematic.

ecumix
26th March, 2016, 05:22 PM
For the old cars good we use just clone fg or kess v2 .

ecumix
26th March, 2016, 05:23 PM
Cmd maybe its good but support but technical assistance cmd sucks up protocols to the Toyota can not do!

ecumix
26th March, 2016, 05:28 PM
if you have company you do only chiptuning work so decide buy cmd but if you working about electronic module and ecu also so cmd waste money and buy kess v2 or magpro x17

gezame
26th March, 2016, 08:52 PM
CMD have issues too (wrong checksum, and you can't disable the tool to make it!), and when you ask their support "Why?"... the answer is always "the problem is in the file"...

Hi
Yes, you are rigth 100%, support response is always "the problem is in your file"

overs0ull
26th March, 2016, 09:49 PM
For me Magpro x17 and Kess v2 are the best (have both of them ) and i do what need to be done .
Galleto su^&s they only can write we can do , we can support this , we can make it - in the end pease of cr^p , no support , nothing ........
Magpro ROCK , Kess Great / with trasdata ori on bdm not have car till now witch i cant make (even today edc17c64 vag + toyota rav4 D4D 136 h.p both read/write like a charm - not from galleto and cmd .......)
No tool is perfect but every one have advantage , no tool support simos 18 /12 like cmd witch make audi RS new supported !
Regards .
one tool is not enough if you want to make almost all ecus SAFETY !

CustomCars
26th March, 2016, 10:11 PM
Anyway tools no help if user was a ..... :02.47-tranquillity: About trasdata now orginal it's expired and no Toyota support. Some one can confirm it ? because website not updated.

ecumix
28th March, 2016, 12:30 AM
overs0ull (http://www.digital-kaos.co.uk/forums/member.php/347121-overs0ull)
you are 100% right for me magpro x17 and full ktag but .......but each of us has a different car market and must adapt programming to their requirements!

offsystem
28th March, 2016, 08:47 AM
Yes that's right I also prefer my x17, so if anyone wants my cmd Master pm me.

zziad
30th March, 2016, 09:26 PM
I buy magpro X17 or KESS V2 ?

zziad
2nd April, 2016, 11:54 PM
x17 can read / write edc17C64 golf 7 By obd ?

gezame
3rd April, 2016, 10:43 AM
x17 can read / write edc17C64 golf 7 By obd ?
Hi
No, X17 write file for unlock ecu, after this procedure, you can read-write ecu by obd.
Br.

glk96000
4th April, 2016, 08:39 AM
x17 can read / write edc17C64 golf 7 By obd ?


Hi

Yes it can Unlock read write all by obd
Magicmotorsport Support is the Best (ticket chat and whatsapp...)



367547367548

zziad
4th April, 2016, 09:28 PM
Hi

Yes it can Unlock read write all by obd
Magicmotorsport Support is the Best (ticket chat and whatsapp...)



367547367548

thanks for replay

With X17 to unlock ecu must be opned ?

regards

glk96000
4th April, 2016, 10:40 PM
No all obd for the lastest VW ecu

Just pcr 2.1 need open for unlock

zziad
8th April, 2016, 12:17 AM
Hello ... anny one have kess v2 orig or magpro x17 pm me with inbox or skype .

NOX
8th April, 2016, 11:42 AM
number one is CMD:)

ecumix
19th April, 2016, 07:40 PM
yes number one......yeap ... not for the money is the first, the Toyota OBD....no...., no mazda sky activ, no Delphi dcm 6.1 ... hmmmm .... if you like ....

digital320
1st February, 2019, 12:20 AM
cmd would be no. 1 if you get what you pay..but unfortunaly device is 90% blocked soon as subs expire no server so you can use it only for some old ecus on k-line..if flashtec doesent do this I would never considering any other tool for obd flashing

mrchip
3rd November, 2020, 11:53 PM
what can I do if Master dont want to relaese my slave CMD tool ? in case if want to stop work with him and want to other master ?
or if I want to my slave tool upgrade to Full Master tool ?
can you please share your experience

figani
4th November, 2020, 08:08 AM
what can I do if Master dont want to relaese my slave CMD tool ? in case if want to stop work with him and want to other master ?
or if I want to my slave tool upgrade to Full Master tool ?
can you please share your experience

actually there is Not much you can do...
everything depends on the Master...
why....?

because you are a Slave...
eqaul which tool/Company/SW...

CMD could cancel all this, but only if you have a proof that the Master is working incorrectly...
but at this point the problem starts, the meaning of incorrectly...

contact cmd support, and explain all...
they are the only, which can help you...

mrchip
4th November, 2020, 01:16 PM
actually there is Not much you can do...
everything depends on the Master...
why....?

because you are a Slave...
eqaul which tool/Company/SW...

CMD could cancel all this, but only if you have a proof that the Master is working incorrectly...
but at this point the problem starts, the meaning of incorrectly...

contact cmd support, and explain all...
they are the only, which can help you...
Thanks Figani,
CMD support is very bad,
they refer me to master and master dont give any response