PDA

View Full Version : Hi need j-tag pinout for this airbag Mazda GMC8-57K30?


gttuning
26th March, 2016, 02:45 PM
Hi any one have a J-TAG pcb pinout mazda 2015.Airbag GMC8-57K30

INFINEON XC2336A56F366090
thanks.
gttuning
26th March, 2016, 11:13 PM
i have one will check out if work>
tamari
29th March, 2016, 02:10 AM
does i work i have one need cleared
gttuning
3rd April, 2016, 08:47 AM
no i try but not working will try different things maybe today.
any body have a pinout for SMOK??
thanks
Ginocar
6th April, 2016, 07:21 PM
Hi m8,
Sorry I have not jtag pinout for this ecu but
AVDI and Carprog can read/write by OBDII.
BR
gttuning
25th May, 2016, 09:44 PM
AVDI try to read ford by obd and kill srs unit.
there is a workin pinout but cant find one
can some one share please?
sawatdee0999
26th May, 2016, 05:11 PM
i made a pinout for this already, and was 100% able to clear the file.
gttuning
26th May, 2016, 09:13 PM
i made a pinout for this already, and was 100% able to clear the file.
can you share please?
sawatdee0999
27th May, 2016, 10:07 AM
This will be the same pinout as it and i read this with carprotool. But any programmer should read this following the steps i made. good luck. Pass in pm.

377958
gttuning
13th June, 2016, 10:23 PM
i try it on two different SRS not work,try smok and cpt
gttuning
14th June, 2016, 12:00 AM
solved......
yaz123
22nd June, 2016, 06:32 AM
382675

Hopefully this helps

PM for password
mcm44
22nd June, 2016, 07:15 AM
Why do you put passwords, for something that is not your work/picture/dump etc. ????

http://carprotool.com/download/CarProTool%20Programmer/CPT%20JTAG%20XC2xxx%20PinOut/CPT_Mazda_Lift_xc2336a-56_jtag.JPG
Carsys
22nd June, 2016, 09:29 AM
THANK YOU ! You have a good point MCM44, to say that ! its from carprotool website. lol
yaz123
22nd June, 2016, 03:25 PM
I just prefer to password protect most of the attachments. Yes I understand it's from CPT. Just because i protect a file does not mean I assume that I am the creator of the file. Clearly it says CPT, so I don't know why you guys are acting like I stole something and claimed it's mine.

Take care lads
Carsys
22nd June, 2016, 03:46 PM
The all point is very simple for protection. just to make sure someone does not copy paste your hard work, and gets the thanks everytime.
I hope you know what I mean by that.
sanjeev
5th November, 2016, 02:29 PM
Good afternoon Friend,

can you give me the pinouts diagram.
Im waiting for your reply.

Thanks.
henal
25th April, 2020, 08:45 PM
382675

Hopefully this helps

PM for password


why do you do this when its not yours, may no one help you in the future.
PSAcars
26th April, 2020, 03:51 AM
Hello to all. This is the pinout. For upa-s is the same.
boxsport
10th February, 2024, 02:28 AM
Hello to all. This is the pinout. For upa-s is the same.

hello guys.
I know this is old, but anyone has the pinout or connections to use carprog or orange5 to read this?
I have the same module here but my clone carprog wont read by obd and i wanted to try direct reading. With carprog or orange5 but not sure about the connections since this is for carprotool
FranciscoAirbag
10th February, 2024, 04:49 AM
TRAY THIS GOOD LUCK
boxsport
13th February, 2024, 10:17 PM
TRAY THIS GOOD LUCK

Thanks. i tried several times but didnt work.
I asked UPA-S to a friend and was able to read.

If anyone can help me clear crash i would appreciate.
http://www.digital-kaos.co.uk/forums/showthread.php/1071593-2018-Mazda-6-GMC8-57K30-Crash-Help
Thanks
boxsport
14th February, 2024, 03:00 AM
Thanks. i tried several times but didnt work.
I asked UPA-S to a friend and was able to read.

If anyone can help me clear crash i would appreciate.
http://www.digital-kaos.co.uk/forums/showthread.php/1071593-2018-Mazda-6-GMC8-57K30-Crash-Help
Thanks


Solved.
Thank You all for the Support.
Cheers