Yaris 2007

[looly]

Hi all

Got a 2007 1.4 d4d with all keys lost. Managed to get a keyblade cut but now need to program a transponder.

My understanding is that key data will manually need to be added to immo box dump and then sync with engine ECU. Is this correct? Also I believe that the immo box is behind the hvac unit in dash which looks like its going to take hours to remove and replace..any short cuts to removing it pls??

Thanks in advance :)

[rob h]

there is a youtube video for this cars dash removal.
no short cut. it is wedges behind the hold heater.
ad key by dump, wil start car, no sync needed.
these keys can be cloned!

[looly]

there is a youtube video for this cars dash removal.
no short cut. it is wedges behind the hold heater.
ad key by dump, wil start car, no sync needed.
these keys can be cloned!

Thanks for the advice Rob, I'll take a look at the video :)

[siyadk]

2 mins job if you have orange obd. Any decent obd tool can do it..need to reset immobiliser

Sent from my YOGA Tablet 2-1050L using Tapatalk

[looly]

2 mins job if you have orange obd. Any decent obd tool can do it..need to reset immobiliser

Sent from my YOGA Tablet 2-1050L using Tapatalk

Thanks. Do you know if x100-pro can do it once immo is reset? And can a used smart key be used or must it be brand new pls?

[siyadk]

If u get communication.. Just reset immobiliser( 16 min wait), then add key
Used key can be used
Can u post pic of the smart key



Sent from my YOGA Tablet 2-1050L using Tapatalk

[rob h]

https://www.google.nl/url?sa=t&source=web&rct=j&url=http://m.youtube.com/watch%3Fv%3DHEkUKOhKOsE&ved=0ahUKEwi7pIGCkOjLAhVE2CwKHSx8A0YQtwIIGzAA&usg=AFQjCNEl5Cari8X66h3hgpN8PKiQUrlmLw&sig2=KgDc7gEv1klj8dc1_2beew. By Obd is for US market, not European market, i assumed!