vw tigaun edc 17 hotstart

[camecas]

hi can you help to fix vw tigaun 2008 edc17 hotstart
thankyou

[BrunoPT]

hi can you help to fix vw tigaun 2008 edc17 hotstart
thankyou


YOUR HOT START FILE

[dominik.m]

Your file HOT START.

[Babos]

there is same to edc15-16

[kalif]

EDC17 no need correct start.... this is EDC16

[Tes1a]

EDC17 no need correct start.... this is EDC16

u are wrong it need and it can be done hot start

regards

[Voltech90]

I suggest modification time warmings candles and hot start and engine start perfect.

[camecas]

the problem still in the car
win the is could start but win it was hot dont start
i

[CustomCars]

I suggest modification time warmings candles and hot start and engine start perfect.

Maybe better check condition and replace if needed ;)

Most cars now have enough fuel to make good hot start, but like before cars at edc17 begin older...

[camecas]

any one can help me

[Voltech90]

My fiend I do this operation every times and wok 100%, check maps, if you are temp up to 0 candles work 1 second, modification to 3-4 seconds and start perfect

[camecas]

can you give me solution i dont understand

[kospoz]

In the past i had done one octavia edc16 with a switch.You can try if you want.First when the car is warm try to disconnect the water temp sensor and see if the car is starting.If the car is ok then make a switch for this sensor.It is very easy.But....sometimes will have fault code.If this solution is ok then someone can remove this fault from dump.

[camecas]

the problem is win i desconnect the water temp sensor the car start normal

[FxShaw]

Why not change temp sensor then? I has issue before when temp sensor went fault and read -deg causing car to dump too much gas and it wont start. or am i missing something else?

[camecas]

i changed temp sensor but the problem still in the car

[kospoz]

what is the value when it is hot the car?You tried with plug off?

[camecas]

the car start but temp sensor dosn t work

[camecas]

no one has asolution

[camecas]

the problem sloved

[kospoz]

nice to hear it.So you solved it with dump or something else?

[FxShaw]

the problem sloved


Good for you but wouldn't it be nice to let everyone that helped you, know what was the issue and how you fixed it...Kick in the face to just come on back and say oh hey I solved it and then go.

[Johnner]

the problem sloved




Actually mate...don't bother answering that.... 5? years here,and you've contributed nothing to DK...help,help,help is all that has come from you...Enough is enough now,don't you think ?