Youneselm
1st April, 2016, 03:12 PM
Don't forget reputation and thanks please.:-)
This is a little program is to help you calculating the injection duration and EOI (End of Injection).
It is intended to be used with WinOls and Microsoft Excel to gain insight in the injection maps of your car.
It is intended for EDC16C39 maps, but perhaps it's useful for other ECUs too?
In the original file, the duration map is in microseconds and the Y-axis is in rail pressure. This program recalculates the map, so that the Y-axis is in RPM and the value is in angle degrees (just like the SOI maps).
It works as follows:
From WinOls copy the Duration map, the Rail Pressure map and the SOI map. Do this by right-clicking on the upper-left corner of each map and choose the 'copy map' option. Then paste it into the small memo fields on the left side of the program (Ctrl-V). Do this for all 3 files.
The SOI map is only needed for setting the desired X-axis and Y-axis.
When all 3 maps are entered, the result will be ready in the big memo field on the right-side. It is in the format to be used with Microsoft Excel.
(There is also a 'demo' button on the lower left, which loads 3 predefined maps as an example).
367165
This is a little program is to help you calculating the injection duration and EOI (End of Injection).
It is intended to be used with WinOls and Microsoft Excel to gain insight in the injection maps of your car.
It is intended for EDC16C39 maps, but perhaps it's useful for other ECUs too?
In the original file, the duration map is in microseconds and the Y-axis is in rail pressure. This program recalculates the map, so that the Y-axis is in RPM and the value is in angle degrees (just like the SOI maps).
It works as follows:
From WinOls copy the Duration map, the Rail Pressure map and the SOI map. Do this by right-clicking on the upper-left corner of each map and choose the 'copy map' option. Then paste it into the small memo fields on the left side of the program (Ctrl-V). Do this for all 3 files.
The SOI map is only needed for setting the desired X-axis and Y-axis.
When all 3 maps are entered, the result will be ready in the big memo field on the right-side. It is in the format to be used with Microsoft Excel.
(There is also a 'demo' button on the lower left, which loads 3 predefined maps as an example).
367165