CD30 MP3 need unregister and pin from display

[simaservis1108]

Hello guys,

Can someone unregister my Delphi CD30 MP3 from Corsa D and provide pin from display?
93C56 in Johnson Controls display - possibly TID???
And 24C32 from Radio.

Regards,
Sima

[attilaa0]

Hi!Something is wrong with 24c32 dump.

[filutek]

24c32 = 4KB

[simaservis1108]

My bad guys.
Here is dump corrected.

[Raimax]

Already unregistered your dump

[simaservis1108]

And display pin?

[filutek]

Read eeprom TID again but as 8 bit....pin=block 0xCE-D1.

[simaservis1108]

Here is 8 bit.
If your algo is correct my pin by 8 bit dump is 3844?

Am I right?

Regards,
Sima

[filutek]

Yes pin 3844

[Alex79]

Hello

I have Delphi cd30 mp3 too ! I dont know from what car it is , and I dont have display from that car .
Can someone unregister this radio and find pin code ?!
What else do I need to fit this radio in to my Corsa ?

please help

thanks in advance

Alex367490

[plasma533]

Code is 6672...

Cant help with the unregister... I'll leave that to one of the masters..

[bulld]

http://www.digital-kaos.co.uk/forums/showthread.php/516873-Delphi-grundig-CD30-MP3-with-Aux?p=2724060#post2724060

check my thread above , an unregistered dump is posted in it

[filutek]

Change by this:367678

[Alex79]

filutek (http://www.digital-kaos.co.uk/forums/member.php/73145-filutek)
Did you try this solution ?

[Alex79]

bulld (http://www.digital-kaos.co.uk/forums/member.php/464792-bulld) and filutek
(http://www.digital-kaos.co.uk/forums/member.php/73145-filutek)
So I have two different solutions now , first I will try solution from bulld (http://www.digital-kaos.co.uk/forums/member.php/464792-bulld)

[filutek]

Work 100% ........

[metkox360]

Hello

I have Delphi cd30 mp3 too ! I dont know from what car it is , and I dont have display from that car .
Can someone unregister this radio and find pin code ?!
What else do I need to fit this radio in to my Corsa ?

please help

thanks in advance

Alex367490

To un-register or un-marry the radio first you need an op-com or better tech 2 then (with your stock radio that you want to remove) go and deactivate anti-theft protection, then fit new one (the new radio that you want to marry to the car) and go in EHU->Programing and activate the anti-theft protection with the code you got from the new radio then you deactivate anti-theft protection and activate it again using your car pass code from the car. Here is a link that i recently had to work on my car and replace the stock Blaupunkt CD30 with Delphi CD30 MP3
http://www.digital-kaos.co.uk/forums/showthread.php/512156-Grunding-CD-30-MP3-EEPROM?p=2705150#post2705150