Focus 3 Airbag Crash Data Clear BM5T 14B321

[streetlegal]

Please could someone clear the crash data for this file,

I will give feedback if it works or not.

Thank you for any help.

367679

[ionuty]

try andpost result...99% clear...

[threepot]

Thank you for your help.

I did not try your file as I was working on making my own file after I started the thread. (different computer with friends username)

My attempt at clearing the crash data and fault codes worked!

Here is the file, and the original, so other people can learn from this experiment.

No passwords.

367843

[ionuty]

08F9-0973 area are data that have not been cleaned (I think) .... extinguished this file the airbag light and no dtc????
???!!!???:questionmark::dontknow:

[auto80]

08F9-0973 area are data that have not been cleaned (I think) .... extinguished this file the airbag light and no dtc????
???!!!???:questionmark::dontknow:

diagnostic tool erased that part and all worked good :)

[ionuty]

ok..
good work!
but this area is not erased in his file...?!?

[threepot]

100% worked ok.

More luck than skill or experience! Never seen one of these before.

I just compared loads of different files I found on here and MHH. Made similar changes and tried my luck.

[threepot]

Right an update.

Firstly Ionuty, your file does not work, it still is locked with crash data. And the fault will not clear.

Secondly, my file does have no faults, and is crash data/locked clear. (by luck) !

The next problem is the car does not start or run, there is a data block on the BCM2 / BCMii called:-

CRASCHS = yes (using ford IDS)

And called some like Vehicle Crashed = true if using Maxisys.

I am at a loss of how to clear this

The vehicle will not start !

Any ideas?

[ionuty]

try this and post your result....good luck!
same pass
08F9-0973 area are ok..

[ionuty]

they say one tested .. not from me ...
if it does not work you do not hesitate asking him...
sal!