PDA

View Full Version : Gilera Nexus 300 dashboard



denis1hr
5th April, 2016, 12:42 PM
Hi guys,

I need to recalibrate the dashboard of Nexus 300 with 24C02.

The original is 24.094km and I need 10.900km.

Here is the original file:

367800

Please calculate the checksum also.

Thanks in advance.

PremierD
5th April, 2016, 01:31 PM
Bit pointleees doing the KMs if we don't also do the crc mate .. what do you think .:banghead:

denis1hr
11th April, 2016, 10:10 AM
Your file not working.

I have NO RPM message and the scooter not start at all.

Can you please check the file.

clusters
11th April, 2016, 10:22 AM
Have you tried putting the old file back to see if it cures that?

sv2hqx
11th April, 2016, 10:26 AM
Bike start without dash
Rpm message is that rpm meter not connected

denis1hr
11th April, 2016, 10:32 AM
I programmed the old file and everything is working fine.

PremierD
11th April, 2016, 08:48 PM
the file and the crc are correct mate ... so look elsewhere :)

denis1hr
22nd April, 2016, 09:55 AM
Sorry, but not working.
There is something wrong with the file because when I program it the dash is immediately on with a key on off.
There is a oil light on and NO rpm message on display.
Can't turn the display and oil light off. Always on.
Also the starter not working.

With original file everything is working fine.

Can anybody else check the file please.

drz
22nd April, 2016, 11:27 AM
The file sent by PremierD is 100% ok, but I think the problem is that your programmer opens the file swapped. Try this one, this is the same dump but in bin format.

vasa
22nd April, 2016, 12:01 PM
conect first rpm clock after power up mate!!!!!@

drz
22nd April, 2016, 12:18 PM
conect first rpm clock after power up mate!!!!!@

Nothing is going to change with that.

denis1hr
22nd April, 2016, 12:33 PM
Nothing is going to change with that.

Yes it does.

Thank you very much for your tip.

The dashboard working like a charm.

I am very thankful to all of your for your help.

legijaaa
3rd June, 2016, 09:49 PM
Hi guys,

I need to recalibrate the dashboard of Nexus 300 with 24C02.

The original is 37.928km and I need 26300km.

Here is the original file:


Please calculate the checksum also.

Thanks in advance.

clusters
3rd June, 2016, 09:52 PM
Can you post a file without all that crap at the beginning?

nikz
3rd June, 2016, 11:34 PM
here is your file

legijaaa
4th June, 2016, 02:59 PM
Thanks mate byt not vorking , whether someone else

Johnner
4th June, 2016, 03:15 PM
Mate below are two pics of 1. Your original file and 2. Your file trimmed to the way it should be with 26300kms in it...


379515379516


It's up to you now to make the necessary changes,and it would be greatly appreciated if you could thank other members for their time and effort,whether they're right or wrong.....

Telling us "Not vorking , whether someone else" just doesn't cut it mate,and shows a complete lack of respect for others efforts...

Carry on...