PROBLEM DPF AIDI A3 PPD1.2

[motorsport]

Hello i have audi a3 Siemens PPD i remove dpf but light dtc always displaying on cluster
and in diag engine there no dtc some one can help me to solve
thanks a lot

here ori and mod

[CustomCars]

that's say you have some problem.
1. Solution is bad. (i dont checked file) but maybe it's ok.

Look for problem in sensors, soot level, oil condition.
At ori file check clearly all errors.

[motorsport]

Have try with autocom make remplacement say done but no change

[motorsport]

Some one can check file ?

[mihaiservice]

Have try with autocom make remplacement say done but no change

Dont exist such optione ! Even in VacPC or ODIS,the only one solution to downgrade dpf ash value are to initiate dpf regeneration if all sensor still are in good condtion !

[LaraVAG]

yes, no posible replace dpf by diagostic tool.

[LaraVAG]

your solution is done by swiftec, buts a lot of DTC its diable. Only way to dpf off its manualy solution, About lamp on dashboard you must do regenration on drive.

[motorsport]

your solution is done by swiftec, buts a lot of DTC its diable. Only way to dpf off its manualy solution, About lamp on dashboard you must do regenration on drive.
Need make manual solution then regeneration
You can make manual please
Thanks again

[spychu14]

There is other way. Reset ash volume by eeprom.

[motorsport]

There is other way. Reset ash volume by eeprom.
eeprom. 93320 ?