e65 cas dead by avdi

[mcGradus]

Car 2003my, i playing with my avdi function "cas keys'' and got a dead cas. Now no start, key not fix in slot and no diagnostic connection with cas. I read flash and eeprom with r270. Mileage in eeprom is right. Can anybody help me? Cas 61.32 6 924 711 with 0k50e368485368486

[antenor]

You need a good FLASH DUMP.

[mcGradus]

Thank you, tried to find

[Speedosoft]

Car 2003my, i playing with my avdi function "cas keys'' and got a dead cas. Now no start, key not fix in slot and no diagnostic connection with cas. I read flash and eeprom with r270. Mileage in eeprom is right. Can anybody help me? Cas 61.32 6 924 711 with 0k50e368485368486

You don't need a flash. Your CAS is in programming mode. The very first byte of your eeprom is set to "AA55". Turn it to "0055" or "FF55" and your CAS will wake up again.

[mcGradus]

Thanks a lot.... But i tryed to set 0055, like in another dumps - no result, tomorrow i will try ff55, maybe... If anybody have full for my cas i can merge it... sorry for my english//

[Gavra]

Did u check your offline database for that dump? C:\ Programfiles(x86) \AVDI\Abrites|common\BMW\data

Sometimes offline programming can help you when it stuck with online....

[Speedosoft]

Here is a set of files (eeprom + flash) out of a E65's CAS.

[mcGradus]

thank you, but no result - your flash + your eeprom no result too (no even diagnostics and no reaction on press button), my eeprom with ff first byte and with 00 first byte - no result. My CAS is fully dead. I find other cas and key with 0l01y on the board, with new cas connected remote key function work well, ignition on, starter run, but no start of course. Launch and AVDI dme-cas sync function not work, say: dme and cas different, sync not possible. Can somebody manually move sync data from my old cas to my new one to try start engine? My new eeprom dump in attachment, my old eeprom in first post. No need to move key data, new cas have a working key. I know that some people can start e65 2007 with cas from 2002, they can not sync by obd too, but they can do it manually, but can not find that people.

[Speedosoft]

So what happens if you load your original eeprom into this new CAS and use your original key?


Sent from my iPhone using Tapatalk

[MV auto]

those 2 dumps doesn't even have the same size... what's up with that? same CAS unit or...?

[mcGradus]

Different processors different sizes of eeproms. I can move vin with my calcs but can not move other sync data.

[ttzag]

What is your mask ?

Sent from my LG-D802 using Tapatalk

[mcGradus]

Thanx 4 all, car ok! We move vin and isn from 0k50e to 0l01y, make cas dme sync and car starts!!! Car is 2003my cas is 2007my, maybe info will helpfull...

[MV auto]

can you share both ISN? so we could find location manually... always good for the "next job"!!

[mcGradus]

Ok, but tomorrow.