PDA

View Full Version : A1 Audi 2012- change the mileage



n599fbm
8th April, 2016, 09:58 PM
Hi guys !!

I have a Audi A1 2012 model, dash containing Nec+24c64, I need change the mileage, I tried, but without!!, I have a DP3 v4.94 clone and Vag KM + Immo Tool,

Someone tell me how ???

Many Tks !!

Rgds.

C.

dave11674
8th April, 2016, 10:42 PM
DP3 !!! diagprog3 ??
or digiprog3 ??
DP3 should nail this vehicle
not sure about blue digiprog tho
dont see why not

antenor
8th April, 2016, 10:48 PM
I think Digiprog only version 4.88 makes this car.

n599fbm
8th April, 2016, 11:04 PM
I think Digiprog only version 4.88 makes this car.


Thks for your answer, but I have a Digiprog 3 v4.94, clone, A1 appear in the Digiprog, but not change the mileage,

anyone has any idea, any special procedure ?

Many thks,

Rgds,

C.

gijsvm
9th April, 2016, 07:15 AM
A1 have 3 kind of dash. till sw 0124 it work with normal A1 soft, if dash have sw 0124---up you can try Q3 soft.

n599fbm
9th April, 2016, 12:23 PM
Friend, I tried with Q3 and nothing, the DP3 identifies the dash sw 0174, then goes out and nothing,

n599fbm
9th April, 2016, 01:30 PM
it is possible to service mode this dash ???

gijsvm
9th April, 2016, 02:21 PM
so digiprog not support this dash

rob h
9th April, 2016, 07:10 PM
it is possible to service mode this dash ???

These types always needs to be in service mode!
For that, you will need a working key!

n599fbm
10th April, 2016, 10:02 PM
These types always needs to be in service mode!
For that, you will need a working key!




which key ?? ignition key ??



RGDS,

rob h
10th April, 2016, 11:00 PM
Yes, a working ignition key alows you to enter service mode. Make sure you safe abs coding, before entering service mode. Or just disconect it under the hood.

n599fbm
10th April, 2016, 11:42 PM
Yes, a working ignition key alows you to enter service mode. Make sure you safe abs coding, before entering service mode. Or just disconect it under the hood.


ok friend, tks for your information, now, which is the procedure for Service Mode ???

rob h
11th April, 2016, 12:00 AM
service mode is a state of the cluster, were it lets you communicated, and alter data.
A avdi vvdi smok or smelecom, have some pograms for this. You can not do this with something like vcds.

You will need a proper tool first. you could download the vvdi2 vag manual. there is a good step by step guide.

I am sure that there is a mileage programmer that can also do this. i think x-100

n599fbm
11th April, 2016, 12:08 AM
ok ,

Many Tks Friend !!