XPROG clone 5.5.5 flash atmega64 - ISP USBASP - HELP NEEDED

[thayer201]

Im need a little help guys

i have to reflash my xprog clone 5.5.5

i have a USB ISP USBASP Programmer AVR which is from ebay

software im using extreme burner.

im using files form http://www.digital-kaos.co.uk/forums/showthread.php/516137-xprog-5-5-5-for-all/page2?highlight=xprog+5.5.5
post 18
vanos batam


when im loading the .bin files i get error in software.
im needing to select .hex files to load in to software to programe the atmega64

either i need to have hex files atmega flash and eeprom or im doing someting wrong?

ive looked at files for xprog 5.0 posted on here and they are in .hex format and load correctly into extreme burner..

anyone have a different way to do with the files i have and the tool i have... maybe a different software
any info would be great.



ive searched and searched

please could someone help.

thanks

[thayer201]

anyone ???? help??

[skizo89]

Xprog 5.55 hex

374157

[mrtobby]

Hi man,
here atmega files work ok 5.55 ver. Remember erase flash mem, erase eeprom mem, set fusebit, program flash mem, program eeprom mem.
if need soft, i can upload.

regards

pass PM

[houdiag]

motpass please

[electronistul21]

i dont can understand for what raison use USBASP.can make this work very easy with UPA,easy and safe.

[mrtobby]

mates... i goto ver 5.51... 5.5.5 is not good, very unstable... :(

[912secured]

5.5.5 runs fine releasesd on mmh originally. Your not setting you fuse bytes right??? It only likes to run on xp.
He has 5.7.6 but not public. They would know what unit he has. Thats why ony the cracked asians are released. You can make a simple programmer that uses your printer port on a old pc (forget real name) with some 100 ohm resistors????

[ZINE DDINE]

Xprog box 5.5.5 Flash + eprom
hello

xprog 5.55

*Atmega64 41

Config.v5.5.5.bin
EEPROM 5.5.5.bin
Flash 5.5.5.binaounzine@yahoo.fr

EEPROM 5.5.5.hex

Flash 5.5.5.hex
These users thanked

[marouanos]

motpass please

[peko]

hi friends

i write flash and eeprom after erase both them but without fusebit
i confirm good write fine reading it after write and comparate data, all is ok

you think xprog will work fine or i must made again using fusebit ?

thanks ;)

[fastrice]

motpass please
thanks!