W220 2002 ESM SHIFTER PROGRAMMING AFTER M.E REPLACED

[AvechuchoAxel]

How to program ESM with star diag (dev mode) after EIS and M.E replaced? EIS/M.E belongs to the same donor vehicle, ESM is the original with vehicle.


Car starts, no check engine codes on dash, but of course shifter is stuck on park position.

What is the method to unlock or pair the ESM with the new EIS/M.E ?

Is there any way to edit vin numbers without going all the way to the dump?

Thanks

[MarkPRP]

Just take plastic part of the solenoid out then if will drive


Sent from my iPhone using Tapatalk

[AvechuchoAxel]

Thanks for the advise....

I'm trying to keep original functionality as much as I can.... but its an option.... BTW it's the plastic AND the metal grey levers that need to be removed.

[vanos batam]

Thanks for the advise....

I'm trying to keep original functionality as much as I can.... but its an option.... BTW it's the plastic AND the metal grey levers that need to be removed.


read ezs and esm the ports both dump
it will help 100% working and no fault in the dash

[djorgensen]

why do you need ro program the ESM?

have you changed the whole DAS then? Can you just adapt the engine ECU if its been replaced? Why do ME and EZS?


why not put old EZS back on, adapt engine ECU to that and bingo the ESM will just work