Q5 BCM2 dump needed

[Gavra]

Hi guys, 8K0 907 064 CP Virgin if possible original needed :) inside is NEC

Thank you all for any help

[Crash-100]

How it's help you ?
I have 8K0 907 064 CT
you have read dump from your BCM2 ?

[Gavra]

No, they put wrong module inside, want to try to put it back to original, SW inside is from 063K and its for A5 not Q5....thank you

[Crash-100]

Write me you VIN in pm I ask what is BCM2 you need

[Gavra]

I found this number with dealer , just need dump because don't want to spend 600 euros on it :)

[Crash-100]

want help send your VIN to pm and dump from your BCM2 I can make all by dump

[Gavra]

Mate , I need dump for that module, module installed in car is 8K0 907 063K which is from A5 and that dump is completely useless for my car. I really appreciate Your help , but this is a F**k up not a normal fault :)

[Crash-100]

friend you f**k my brain 8K0 907 063K is BCM and 8K0 907 064 CP is BCM2 what you neeeeed ?

[Gavra]

Someone was playing smart and put inside 8K0 907 064 CP dump from 8K0 907 063K do you understand me now?

[Crash-100]

BCM is 9S12DT384, how you write this to NEC - impossible
put your dump

[Gavra]

Tomorrow when delivered to me. Just wanted to be prepared.

[Gavra]

Here is dump,and in order to receive VIN please delete some of Your PM,as it is NOT possible to send you one .

[Crash-100]

size flash not correct must be 768 432 byte

[Gavra]

I trust only in EDC17 dump because it was only thing NOT opened before, as I said in first post,please ORI dump so I can go from there. Everything in this car was already messed with,and I need DUMP for 8K0 907 064 CP as that is box I am holding in my hand and believe that will give me more info where to go next. if possible VIRGIN please. Thanks again for your time.

About flash lenght, this dump was read with Orange5 and it's binary, . SGO file is 768 but that file can't be loaded into NEC directly,only over OBD, or there is some tool to extract binary from SGO that I do not know about?

[Crash-100]

friend ......................................
do all what I ask you.
you read Nec 70F3380 or other with size 524288, but you need read NEC 70F3381 or 70F3634 with size 768 432 byte.
What happend with car ???

[Gavra]

NEC 70F3381M2 and this dump inside. Please ORI, discard any other info except gateway and EDC dumps if CS is same. If not look at EDC only. They swapped BCM and BCM2 to test LED on another car,and killed both. Don't ask how just help :D

[Crash-100]

NEC 70F3381M2 size 768 432 byte:banghead:

[Gavra]

OK, agree , give me correct dump please. Because there is no info who ,how and when write this into module I received. And I already told you to discard anything other except EDC as it is only thing not opened until today. Cars are immovable for couple of months now and my job is not to be detective ,it's to get it starting if possible. Thank you all for help.

[Crash-100]

You must know bcm2 consist all info about car if data from BCM2 dissapear you must need change key if your car with AT onlly dealersheep can help you, engine start but car stop on one place

[Gavra]

I know that I may need new keys. I am aware that unlocking of transmission is inevitable, but please understand that right now I have opportunity to earn good money and to help all other members with solution for this car in the future if I succeed in starting it. Not always is possible to get your hands on such a new car for this kind of fault, and it can be helpful to gather as much information available and to save all dumps readable for future reference.

Thank you for your help ,it is really appreciated.

[Crash-100]

Your car without AT this is good, 1 Key. this is good.
Write me to Skype.