PDA

View Full Version : GOLF 5 1.9 TDI BLS LAUNCH CONTROL


rimniceanu
19th April, 2016, 11:33 AM
BOSCH EDC16
03G906021HB


I need launch control on 2500RPM.
I found only maps for 1st gear, not 0 km/h.
Please help


Thanks in advance
NASTASE
19th April, 2016, 08:18 PM
Hi mate,
Ask here,maybe will find the right file.
http://rimperformance.ro
teamtuner
19th April, 2016, 08:27 PM
Hi mate,
Ask here,maybe will find the right file.
http://rimperformance.ro
:banghead::banghead::banghead::goodpost:....NASTAS E...you are a bad guy....:beer:
vasco fernandes
19th April, 2016, 09:25 PM
you can do LC by driver wish maps.
lucim12
19th April, 2016, 10:07 PM
you can do LC by driver wish maps.

realy....? how is that?
CustomCars
20th April, 2016, 08:01 AM
LC by DW.... yeah great idea man.... :-)
I must say u're really pioneer
vasco fernandes
20th April, 2016, 11:17 AM
realy....? how is that?


there is a wish driver selector which selects by vehicle speed
rimniceanu
20th April, 2016, 11:23 AM
Make launch control at this map and after tells how make. Thank you
lucim12
20th April, 2016, 03:16 PM
there is a wish driver selector which selects by vehicle speed


that wold make sense..
so you only need dw selector and related dw map?
vasco fernandes
20th April, 2016, 03:27 PM
yes

frist map rev 2500rpm up to ~15kmh. And after 15 kmh select the other DW maps
NASTASE
20th April, 2016, 08:12 PM
yes

frist map rev 2500rpm up to ~15kmh. And after 15 kmh select the other DW maps
No , you're in wrong mate.Look on damos file for this ECU and will find the answer.
But anyway,this is LC file for Rimniceanu, no pass.
No need thanks.
370854
rimniceanu
20th April, 2016, 08:53 PM
Not working your solution NASTASE, limited in 1st gear at 3500 rpm. I limited in 1st gear at 2500 rpm.
vasco fernandes
20th April, 2016, 09:50 PM
370879


try this...
lucim12
20th April, 2016, 10:31 PM
370879


try this...

does your method with DW work for you tested?
maybe I will give it a try when i have a chance to..
rimniceanu
20th April, 2016, 10:32 PM
Tomorrow i will test solution with dw


Sent from my iPhone using Tapatalk
NASTASE
21st April, 2016, 10:05 AM
As you know,EDC16U have 7 maps for "Begernzungsmoment fuer"x"Gang", mean,for all gears we have a Torque Limiter map.
To set the right RPM for LC, only need to put zero to the corresponding map values of RPM.My file was made indeed for 3500RPM, you can choose any engine speed you want.
This is the map and also your LC file set to LC at 2500rpm.
370976
CustomCars
21st April, 2016, 11:08 AM
Real LC is there only if boost was build in procedure, best achieve about 0.8bar for start, about 3k rpm should be fine.
other way don't have any sense....
rimniceanu
21st April, 2016, 11:10 AM
NASTASE i know, but at this ecu don t work! 1st gear torque limited only. I make LC for other cars same with you and work! Is possible to don t work?


Sent from my iPhone using Tapatalk
NASTASE
21st April, 2016, 02:08 PM
NASTASE i know, but at this ecu don t work! 1st gear torque limited only. I make LC for other cars same with you and work! Is possible to don t work?


Sent from my iPhone using Tapatalk
No is not possible, is not only this map moded, there are also a lot of "switches".and small maps moded.Look on difference between ori and LC file, open a damos file and find their significance.