clauberty
20th April, 2016, 06:07 PM
Hello to everyone
i wold need a litle help with this tool
for me it is not clear how to use, i ask smok but i have 1 answer per day in this way ....
golf 6 PCR 2.1 and dash is lost MCU in short so no CS no pin no key
i have a SH dash but with NEC and 24c32 ori dash was with 1M80F and 25P20
ecu unlock and read PIN CS MAC1 MAC2
Dash put in service mode read CS and PIN and leave service mode
now login dash (with dash pin and CS)
after add new immo data (from ecu) CS, PIN, VIN, Immo ID (all 0) Power class, CS[7..12] here again put 0 all
SW log window feedback is Finished
Help from tool: After this operation Immo take new data and lost all learned keys. MAC2 will be learn automatically.
Help from tool: "After learn immo witch (probably "with") new data next step you must go in ECU and login with PIN. It learn MAC1." -> how i do this? with what? learn new key before this or after?
Thank you
i wold need a litle help with this tool
for me it is not clear how to use, i ask smok but i have 1 answer per day in this way ....
golf 6 PCR 2.1 and dash is lost MCU in short so no CS no pin no key
i have a SH dash but with NEC and 24c32 ori dash was with 1M80F and 25P20
ecu unlock and read PIN CS MAC1 MAC2
Dash put in service mode read CS and PIN and leave service mode
now login dash (with dash pin and CS)
after add new immo data (from ecu) CS, PIN, VIN, Immo ID (all 0) Power class, CS[7..12] here again put 0 all
SW log window feedback is Finished
Help from tool: After this operation Immo take new data and lost all learned keys. MAC2 will be learn automatically.
Help from tool: "After learn immo witch (probably "with") new data next step you must go in ECU and login with PIN. It learn MAC1." -> how i do this? with what? learn new key before this or after?
Thank you