Corolla 2015

[gagopc]

Hello
i try to correct this model Toyota Corolla 2015 , if any one try to help that will be great , all can check the picture and if he can help .
thank for all who try to help .

370987..370989..370991..370992

[Rerouter]

should be a 24C16

[PremierD]

You need Tommy Cooper mate ...... Fujitsu mcu ... lol

[gagopc]

should be a 24C16
.
did you mean the eeprom beside top of the MB91F037 it should i read it as 24c16 ?
i read this eeprom as 93c76 , c88 , c66 but it is not work , i didn't try to read it as 24c16 .
thank you for helping .

[gagopc]

You need Tommy Cooper mate ...... Fujitsu mcu ... lol
.
i try to find Fujitsu mcu MB91F037 in all my devices but not succeed .

[balodiya]

may be eeprom in overside of dash?

[gagopc]

may be eeprom in overside of dash?

i check it , there is no any eeprom , just led light .

[PremierD]

Mate .. it's in the fujitsu .. needs to be done obd .. or with a dedicated programmer .. its in a lot of eastern vehicles now .. kia /hyundi /honda .. ect ect ect .. I heard a rumour that the x100 can do them but cannot guarantee that.



Unless someone knows different :)

[digimile]

hi
smelecom do this...
thanks

[gagopc]

[QUOTE=PremierD;2752810]Mate .. it's in the fujitsu .. needs to be done obd .. or with a dedicated programmer .. its in a lot of eastern vehicles now .. kia /hyundi /honda .. ect ect ect .. I heard a rumour that the x100 can do them but cannot guarantee that.
.
yes correct what you say about Fujitsu , and i have 2 devices ( smelecom , dp4 ) can correct this MC model , but this number MB91F037 model it can cover it .
the x100 last update they can do D70F34XX , D7035XX
but the MB can't cover it .

thank you for your help .

[gagopc]

hi
smelecom do this...
thanks
.
NO it can't , i have error massage 0072 in this device .

371010

[auto car]

93C66 UNDER SPEED MOTOR

[gagopc]

93C66 UNDER SPEED MOTOR

where >> can you mark it in picture pls .

[juancho18]

the dash has a like Toyota RAV4 2004- 2008 eproom 93c57

[balodiya]

this is from rav4 кф57, and with corolla different

[juancho18]

.....................

[PremierD]

2006 ...... >..... 2008.


i try to correct this model Toyota Corolla 2015

[juancho18]

JUST I AM SAYING THAT I'M HAVING A DASH SIMILARITY Toyota RAV4 2006- 2008

solution
2015 toyota corolla dash
eeprom 24C16 VDO
Toyota Corolla - 24c16 VDO - 2015 year

[balodiya]

Toyota RAV4 2006 - 2008 dash made by Denso, Denso<>VDO, algo absolutely different, all in this dashboards absolutely different

[PremierD]

JUST I AM SAYING THAT I'M HAVING A DASH SIMILARITY Toyota RAV4 2006- 2008

solution
2015 toyota corolla dash
eeprom 24C16 VDO
Toyota Corolla - 24c16 VDO - 2015 year
:)
OK eejit .. if its similar .. (apart from being made by Toyota )that is .. post a picture of the MCU and PCB

[gagopc]

any picture will help for corolla 2015 front side of the board shown the eeprom .

[Triniguy]

may has micro C66

[hcip]

this is from rav4 кф57, and with corolla different

no,,,,
his Dash is most similar to Toyota Avensis 2014

[Triniguy]

did a 2015 Corolla recently and this one had a eeprom c66

[TULGEYWOODMAN]

SMOK.................

[XmoDDeR]

there are 2 dash 2015 , i have brought both

[Plcautoparts]

I believe there should be 3 clusters L model which is the same as the LE model, then you have the LE ECO (2ZRFAE engine) and but last but not least the S type,
and should be a 93C66 eeprom, attach is a dump from a 2015 Corolla, SHould be the same 2014-2015!

[hoangtu]

mssop 93c66!

[hoangtu]

corolla 2015 front side with msstop 93c66

[digimile]

hi
make connection points other side of the pcb.....it will easy next time
thankx

[SergeyIg]

hi
make connection points other side of the pcb.....it will easy next time
thankx
Just judging by the pictures of IC2 and IC3.
EEPROM 93 series always 1-4 feet go directly on the processor (sometimes through rezistor assembly such as IC2 pictured)
On the contrary, 2 leg IC2 in the pictures is the capacitor, then it's 100% not memory.
Eeprom in this Panel really IC3.

[digimile]

hi
yes ic3 is eeprom i see the picture 1,2,3,4 have point on other side of pcb just trace the 5 and 8
thanks

[gagopc]

hi
yes ic3 is eeprom i see the picture 1,2,3,4 have point on other side of pcb just trace the 5 and 8
thanks

Can you show me how can I do it with picture pls .

[gagopc]

Just judging by the pictures of IC2 and IC3.
EEPROM 93 series always 1-4 feet go directly on the processor (sometimes through rezistor assembly such as IC2 pictured)
On the contrary, 2 leg IC2 in the pictures is the capacitor, then it's 100% not memory.
Eeprom in this Panel really IC3.

If you can show me how can I correct ( pinout ) this model from bag side in picture pls .

[hcip]

If you can show me how can I correct ( pinout ) this model from bag side in picture pls .

its not risky to remove needles of denso stepper motors, why didnt remove and go directly to eeprom?

Just beware to the flat ribbon wire of lcd when removing to see the eeprom

the connection of eeprom to the other side of PCB is under the MCU, if you want to connect it from the backside, then its hard to remove the MCU than to remove neddles

[hcip]

easier to remove the needles instead of waiting for reply from the forum

[gagopc]

easier to remove the needles instead of waiting for reply from the forum
.
what i mean it is from bag side as in picture , because one of forum in this post said it can correct from bag side from this point in picture .
.
371934

[hcip]

.
what i mean it is from bag side as in picture , because one of forum in this post said it can correct from bag side from this point in picture .
.
371934

it is Jtag connection, I know that there is a programmer that can access from that pad becuase the manufacturer program it from that connection point

Remove the needle wil solved your problem, use Fork, its so easy

[hoangtu]

it is Jtag connection, I know that there is a programmer that can access from that pad becuase the manufacturer program it from that connection point

Remove the needle wil solved your problem, use Fork, its so easy

perhaps it will be softer on the job. sister :)
371966

[mecjp]

i do with msop8 pogo c66 with digiprog 3 like there
http://www.speedofix.com/adapters/pogo-adapters.htm

Time is money

[jomberykaso]

i do with msop8 pogo c66 with digiprog 3 like there
http://www.speedofix.com/adapters/pogo-adapters.htm

Time is money

Very expensive, I made my own by myself

[mecjp]

yes, did u have picture of yours?

Time is money

[MV auto]

I have one of those toyota pogo pin adapter for my smelecom... if no one find you the pin, I'll take a look at it tonight... to find which pins goes where and if possible which pin is what (since you probably won't use it on smelecom tool, right?)

[gagopc]

i do with msop8 pogo c66 with digiprog 3 like there
http://www.speedofix.com/adapters/pogo-adapters.htm

Time is money
you are correct , time is Money .

[Triniguy]

Palo this panel has a micro C66 in the front. You can pull the needles of easy. A lot of screws too. I use the Rav4 2O15 option on my Smelecom and have np. Hope I could help you