View Full Version : iaw16f rev limiter
grofone
23rd April, 2016, 11:59 PM
hi
i have fiat 500 sporting ecu iaw16f, i need to find rev limiter , i need 8000rpm.
thanks
br
bobolin4o
24th April, 2016, 08:59 AM
Which is the ori rpm limiter?
electrix
24th April, 2016, 10:09 AM
Hi, 8000 RPM for You.
BR.
grofone
25th April, 2016, 10:38 AM
Hi, 8000 RPM for You.
BR.
hi electrix,
thanks for your help, but not work the car runs at 7000 rpm.
another solution?
thanks
br
roby
rapkopat
25th April, 2016, 01:07 PM
pass pm.......
grofone
25th April, 2016, 03:31 PM
[QUOTE=rapkopat;2755299]pass pm.......[/QUOTE
hi rapkopat, thanks for your help but not work, rev is 7000rpm
br
roby
CustomCars
25th April, 2016, 04:09 PM
Any ECM titanium pirated edition possible can't work on it.
Other question is, for it needed fuel and full reconfiguration much job
grofone
26th April, 2016, 02:25 PM
no one knows how to help me ?
vitalka84
26th April, 2016, 02:43 PM
expensive work
electrix
26th April, 2016, 07:08 PM
hi electrix,
thanks for your help, but not work the car runs at 7000 rpm.
another solution?
thanks
br
roby
There's no another solution. I've tested it hundreds times and always works.
grofone
26th April, 2016, 10:52 PM
There's no another solution. I've tested it hundreds times and always works.
hi electrix thanks for your reply,
i tested your solution but the car runs a 7200rpm, the lambda is ok,i have 2 lambda original and AEM linear, in this moment i use original file map only rpm limiter.
Tomorrow i will make a log with iawecuscan, and report.
br
roby
CustomCars
27th April, 2016, 07:46 AM
I don't checking files but im sure, it no work with more than 7200 because software deliverer -> manufacture don't prepared car to work with that much RPM's. So like i wrote there is much more work to achieve it. Basic limit is only for protection not for unlocking unlimited RPM.
electrix
28th April, 2016, 06:42 AM
I don't checking files but im sure, it no work with more than 7200 because software deliverer -> manufacture don't prepared car to work with that much RPM's. So like i wrote there is much more work to achieve it. Basic limit is only for protection not for unlocking unlimited RPM.
You are wrong, bro. I've done many Fiats with old Magneti Marelli ECUs for rally, street race etc. and there's no need to recalibration other maps for only higher rev limit. In ori dump as above, stock RPM limiter is at 6800 RPM, but RPM axis for maps are scaled only up to 6000 RPM.
Brunex1982
1st May, 2016, 09:56 PM
Hello good night, can you put more power in my file remaped and turn off speed limit. THANKS :)
I dont have de origin and i dont know how much power i have. THANKS AND REGARDS:)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.