PDA

View Full Version : How to read SID803 without BDM adapter?



blajetooo
25th April, 2016, 03:31 PM
Hi.Can someone know how to conect KTAG without BDM adapter to SID803 from peugeot 407.Becouse I dont have BDM adapter for now.I need scheme for direct conection to boarf of ecu.<br />
Thanks!

Sent from my SM-G920F using Tapatalk

teerak2uk
25th April, 2016, 04:22 PM
Hi.Can someone know how to conect KTAG without BDM adapter to SID803 from peugeot 407.Becouse I dont have BDM adapter for now.I need scheme for direct conection to boarf of ecu.<br />
Thanks!

Sent from my SM-G920F using Tapatalk
Select make/model and ecu in prog and select direct connection and it shows the pictures

pulsar2000
25th April, 2016, 04:56 PM
google, it,
loads on it
371768

blajetooo
25th April, 2016, 05:53 PM
which are this pins on the KTAG?to know how to plug the cable.

Sent from my SM-G920F using Tapatalk

blajetooo
25th April, 2016, 05:59 PM
Because i dont know which is PIN 1 on my ktag and others pins .

Sent from my SM-G920F using Tapatalk

pulsar2000
26th April, 2016, 10:43 PM
Same as far as i know as Fgtech,. so if you google 372097Different port i know, but pins should be same order on the ribbon you use,
Hope this helps

davecooper47
30th January, 2020, 07:07 PM
Just done one from a Volvo. This is the direct wire up for KTag. Doesn't include power so use normal cable onto pins (2x 12v and 1xNegative). Ktag shows diagram for power but not for bdm points direct so if you haven't got adaptor you need this.