PDA

View Full Version : disable torque monitoring edc17c19 opel insignia


biagio4984
26th April, 2016, 07:39 PM
Hi,

Can anybody who has Swiftec disable torque monitoring?


Tnx
waldi1979
26th April, 2016, 08:10 PM
I tried (Zafira C 2.0 130) but it didn't work.
mihaiservice
26th April, 2016, 08:39 PM
Wich one are the real problem ?
Andrei2015
26th April, 2016, 09:35 PM
here you have it
CustomCars
27th April, 2016, 07:42 AM
Report about solved case...
Post all DTC and full problem, and write how much TQ you want achieve
ecutuners
27th April, 2016, 07:53 AM
2 maps to modify then you can have upto 1000nm without any problems. Takes less than 3 minutes
CustomCars
27th April, 2016, 08:44 AM
2 maps to modify then you can have upto 1000nm without any problems. Takes less than 3 minutes

I think there is different problem, and that's why i ask for DTC.
But maybe truth, all limiters not found.
biagio4984
4th May, 2016, 07:37 PM
file Andrei2015 (http://www.digital-kaos.co.uk/forums/member.php/450149-Andrei2015) ok. thanks.
kingarthas
30th September, 2016, 02:08 AM
Looks like Swftec disable
voltechcar
30th September, 2016, 09:03 AM
good tune for this ecu = calculated fuel on 1 horse and solved this problem. When you remaping injection time you calibrated fuel and you have dtc with TQ.
kingarthas
30th September, 2016, 12:07 PM
good tune for this ecu = calculated fuel on 1 hourse and solved this problem. When you remaping injection time you calibrated fuel and you have dtc with TQ.

:) For any ECU and any auto gear... No pb to calculate IQ for to NM, the problem is torque monitoring plausibility check.
mumblingmatt
24th January, 2020, 02:06 PM
Does anyone have the password for the file above? I'm trying to do the same thing.