Audi A4 RB4 dash problem

[cardiagnostic2]

After km change with vagdashcan there was DEF shown on km .
After 20 try there is no DEF message but now dashboard cannot see immo data is missing and cannot adapt new key.
PIN code i can enter and acess is gained but with new transponder still cannot program it .
Any one can make virgin dump in dash to adapt it and make key or other salution?

[d2mike]

You just did it in the wrong way of matter.
1st match immobilizer from engine ecu to instrument cluster w/ login and adaption channel #50.
2nd match keys to your immobilizer system w/ login and adaption channel #21.

I see 8 keys in your dump?! I don't think that you own so many:-)

[cardiagnostic2]

You just did it in the wrong way of matter.
1st match immobilizer from engine ecu to instrument cluster w/ login and adaption channel #50.
2nd match keys to your immobilizer system w/ login and adaption channel #21.

I see 8 keys in your dump?! I don't think that you own so many:-)
I have pin from ECU and pin from dash 5053 and access is gained but cannot adapt each other..
If made dump virgin will help ?

[d2mike]

What's the error message? System Not Okay?

[honingkoning]

After km change with vagdashcan there was DEF shown on km .
After 20 try there is no DEF message but now dashboard cannot see immo data is missing and cannot adapt new key.
PIN code i can enter and acess is gained but with new transponder still cannot program it .
Any one can make virgin dump in dash to adapt it and make key or other salution?

Why dont you pit resquefile back?
As i can remember vdc always makes a resquefile.

Wbr Adam.

[Madol1]

What's the error message? System Not Okay?

What to do if the other one dash will not to match with ECU. When you put the pin from dash and on chanel 50 only System Not Okay message?

[cardiagnostic2]

What to do if the other one dash will not to match with ECU. When you put the pin from dash and on chanel 50 only System Not Okay message?
exactly this happen :)

[d2mike]

System Not Okay is the result of Engine ECU PIN reading w/ bad tools :-)
Try to write the SKC directly from Engine ECU to Dashboard and then match keys over the common way w/ VCDS.

I have done this at least 1k time w/o any issues.

Virginized dump is not a option in that case.

[Jonas123]

System Not Okay is the result of Engine ECU PIN reading w/ bad tools :-)
Try to write the SKC directly from Engine ECU to Dashboard and then match keys over the common way w/ VCDS.

I have done this at least 1k time w/o any issues.

Virginized dump is not a option in that case.

I have same situation. I have both dash pin. Old dash pin maches ecu pin. Why it can be bad pin if i'm geting system not ok when try adapt ic to ecu ?

[andrze]

send file please , i can fix it

[Jonas123]

send file please , i can fix it Here you go ! :))

419525