PDA

View Full Version : Help dash Navara 2011


vankoal
27th April, 2016, 10:09 AM
Please help me with a Navara Visteon dash calibration. Motorola MC9S12XHZ256VAG Mask 1M80F

Old: 213063km
New: 112242km
nikz
27th April, 2016, 10:20 AM
bad dump read again
vankoal
27th April, 2016, 10:38 AM
I read with Motorola 912 programmer .
I think that is not correct .
vankoal
27th April, 2016, 11:45 AM
with xprog372188
antenor
27th April, 2016, 11:54 AM
with xprog372188

Bad Dump!! All FFFFFFFF....
vankoal
27th April, 2016, 11:57 AM
Dump is ok !!!
Problem solved !!!
antenor
27th April, 2016, 12:14 PM
Dump is ok !!!
Problem solved !!!
Yes your Dump is OK!! :02.47-tranquillity:
mctr
17th January, 2018, 06:12 AM
Hy,
Does anyone know If i can mod the Navara 2011 dash with Carprog? Mcu 9s12xhz256vag. In Carprog have pics only for old dash model.
I've tried crossref with upa, +5v and ground on the condenser under mcu, reset(green on upa = blue in Carprog) in the circular contact point, data pd3 (orange in upa=grey in Carprog) in the condenser near mcu.
I miss anything? It does't read, like no contact.
Thank you in advance!
mctr
21st January, 2018, 01:36 PM
hy,

i need help with a modified dump for navara 2011, MCU 9s12xhz256vag. actual 88613 km, need to modify to 92100.

thank you in advance!
nikz
21st January, 2018, 01:48 PM
post here dump for help
mctr
21st January, 2018, 01:50 PM
and original dump.

thanks
nikz
21st January, 2018, 02:02 PM
dump bad............................
mctr
21st January, 2018, 02:48 PM
dump readed again, now. dash works with, shows 88613 km.
nikz
21st January, 2018, 02:57 PM
bad.................................
mctr
21st January, 2018, 03:03 PM
this dump is ok, for 91300 km value?

thanks.