PDA

View Full Version : Fiat Panda immo off IAW 5NF.S8


SPIROS2105
27th April, 2016, 03:30 PM
Hi
i NEED IMMO OFF SOLUTION FOR FIAT pANDA
IAW 5NF.S8 51788362
EPROM 95160372241372242
fLASH

tHANKS
antwnhszr
27th April, 2016, 05:04 PM
looking on the forum here and find how to read the eeprom from this ecu.after that post your dump and someone guy make immo off for you.
regard's
SPIROS2105
27th April, 2016, 05:25 PM
i FIX IT
I READ IT WITH UPA AND THE FILES ARE IN FIRST POST
THANKS ANTONIS
peppe82
20th March, 2018, 10:25 PM
Non ce nessuno che riesce a fare immo off?
monter5555
16th October, 2018, 05:58 AM
I need immo off too.

Did this worked?
antwnhszr
16th October, 2018, 08:53 AM
post your dump from eeprom.....95160.
monter5555
16th October, 2018, 02:26 PM
Here is it.......i got key error in ecu and in siemens body computer.
antwnhszr
17th October, 2018, 08:47 AM
Here is it.......i got key error in ecu and in siemens body computer.

ready m8....put my file on the ecu and then cut the 30V+ and connect with 15V+
monter5555
17th October, 2018, 11:54 AM
Ok thanks.I will post result.
monter5555
18th October, 2018, 06:18 PM
Guys........this is a 100% fix.Thank you antwnhszr (http://www.digital-kaos.co.uk/forums/member.php/108056-antwnhszr) for make the dump work.

On iaw5nf.s8 ecu you need to cut wire on B plug pin 16 and connect it to B plug pin 29.................and car starts.(with eeprom immo off).Hell of a work since eeprom is on back site of the ecu.Thank you for that Marreli.
GERCOMOTIVE
8th March, 2019, 05:09 PM
Hello pass please for file antwnhszr
hellmet
7th July, 2022, 10:38 AM
Pass please thanks
Mr BLACK
7th July, 2022, 11:07 AM
post eeprom data ....
PaoloDigital
16th July, 2022, 12:06 AM
ready m8....put my file on the ecu and then cut the 30V+ and connect with 15V+

Helo , have to make tfis ecu , have please password for file quote, or make me ather file . The mod byte are common calssic as adress line 90 A0 ?

And explain exactly how is the issue of pins, momentary or definitive?

I indicate you as connect tis ecu with adaptor UPA and schematic
Rubair
25th March, 2023, 08:48 PM
In have same problem with a Fiat panda 2005 with IAW 5NF S.8
I prepared the file as t1, t2 and I cut pin 16 by connecting it to pin 29 of socket b but nothing, the car doesn't start
can you prepare the file for me? thanks friend
elektronik325
25th March, 2023, 09:31 PM
Your immo off. Please two magic button. Thanx+Reputation and pass Pm