PDA

View Full Version : TOYOTA LAND CRUISER 2009 SMART KEY



NORSHAN
28th April, 2016, 06:10 PM
HI FRIEND
I need vrigin files for toyota land cruier 2009
smrt key ecu 89990-60141
ecu ID code 89784-60010

davidjunior
28th April, 2016, 08:46 PM
Only can reset, do not have any virgin bin files, might be some other brother will give you that.
In the mean time reset files are here they might be good for you.

Thanks David,

NORSHAN
30th April, 2016, 06:15 PM
so thank friend but your soltion didnt work

aketokediag
30th April, 2016, 08:36 PM
Hello M8,
If you dont mind my dump, but am very sure it will start your car. i prepared you virgin file,try and perform syncronize between the ECU and IMMO open driver's door, turn ignition ON short terminals Tc (PIN13) CG(PIN5)in the DLC/OBDII connector leave it for 45minutes the car should start. PASS in PM please dont forget to push thanks button.

NORSHAN
9th May, 2016, 02:18 PM
so thank friend but your soultion didnt work car didnt go ACC ON
any body can extarct original key from dump for TPX2 CHIP

siyadk
9th May, 2016, 10:20 PM
so thank friend but your soultion didnt work car didnt go ACC ON
any body can extarct original key from dump for TPX2 CHIP

cannot.. because this dump is dst 80 bit, only possible on dst 40 bit dumps



Has someone already to program this car before? because the dump has some serious flaws..
post key data with page 1 :98, will add key to dump to start car directly. Will give a shot on how it goes

NORSHAN
10th May, 2016, 10:32 AM
374580so thank friend this key data
P1: 98
P2: 08
P3: 63 E8 45 1D
P8: 98 2B 15 99 42

siyadk
10th May, 2016, 12:52 PM
key added...test n report

NORSHAN
12th May, 2016, 07:39 PM
so thank friend car ingtion on with samrt function remote work lock unlock but no starter function and didnt start
I am try with TC AG jumper for 45 min but didnt start

NORSHAN
13th May, 2016, 05:23 PM
any body has good soultion for my smart car where is gwee ?

PremierD
13th May, 2016, 06:17 PM
Sri Lanka .......

PremierD
13th May, 2016, 06:22 PM
cannot.. because this dump is dst 80 bit, only possible on dst 40 bit dumps



Has someone already to program this car before? because the dump has some serious flaws..
post key data with page 1 :98, will add key to dump to start car directly. Will give a shot on how it goes

I agree the dump looks half reset .. with one key only ..

PremierD
13th May, 2016, 06:38 PM
But give that a shot anyway ...

siyadk
13th May, 2016, 08:15 PM
Esl corrupted...check whether your steering lock releases when ign gets on

NORSHAN
14th May, 2016, 12:13 PM
car was work perfect only key lost
now I am trying PreimerD file and report

NORSHAN
15th May, 2016, 12:10 PM
so thank PreimerD for your help
but your file didnt work never
please any trusted soultion

siyadk
15th May, 2016, 08:40 PM
car was work perfect only key lost


please check your esl working or not. Car working perfectly before doesnt mean your esl is working now

NORSHAN
16th May, 2016, 08:39 AM
Now Esl don't work only ingtion on remote work but starter didn't work

siyadk
16th May, 2016, 11:31 AM
Now Esl don't work only ingtion on remote work but starter didn't work

I told you......

Check pm

aketokediag
16th May, 2016, 06:51 PM
so thank friend but your soultion didnt work car didnt go ACC ON
any body can extarct original key from dump for TPX2 CHIP

So sorry for late reply, you can get ignition with my files but am very sure it will definitely work for you just register key and you get ignition and you apply short terminals Tc (PIN13) CG(PIN5)in the DLC/OBDII connector leave it for 45minutes the car should start.
Regards

NORSHAN
16th May, 2016, 07:13 PM
I TRY to short TC CG for 45min but no sucsses

rob h
16th May, 2016, 07:20 PM
pin/terminal 4 (CG)