Idle speed increase - VW T5 1.9tdi EDC16

[tomlib]

Hi, I need help with increase idle speed to ~980rpm. By VCDS (after login) I can increase max 910. Read MPPS obd2.

Thanks friends for help!

[chli1976]

Look at f6a56 4x1 and f6c6e 4x1.

Normaly it is a 4x5 map also, with temperature and airpressure in xy, but i can not found it

[kospoz]

why you want so much idle?

[mateusz1611]

I don't know why You need that high iddle speed but if You want You can try this:

372587

[tomlib]

not work, still 910rpm. I test file from attachment and the same situation...

customer wants to delay the replacement of the clutch and pass the range of vibrations...

[mateusz1611]

Try now. To iddle is several maps, now I foud more:
pass like before

372655

[tomlib]

Thanks! It works!

[mateusz1611]

nice :) thanks for replay

[spychu14]

This modification will cause dead of DMF even faster. When you start car flywheel have to take shot from 0 to higher RPM.

[vagva]

not work, still 910rpm. I test file from attachment and the same situation...

customer wants to delay the replacement of the clutch and pass the range of vibrations...
Hi friend
are there any vibration after replacing Clutch plate ? if yes , you can update ecu flash , tested 100%

[CustomCars]

This modification will cause dead of DMF even faster. When you start car flywheel have to take shot from 0 to higher RPM.

That's right. "Any clever" solution will be not work. That's should be working great with factory setting, still have mechanical issue, but if customer look for short time cheap solution - they car.

[spychu14]

From the same reason start map looks like it looks. Shot from 250 RPM to 850 is not so harmfull ass from 0 to 850 :)