View Full Version : Mileage correction VW, Skoda 2015 with AVDI
kari11
29th April, 2016, 06:52 AM
Hy All,
I would like to know whether you are able to do Avdi the mileage correction?
Kari
lupu_sandu
29th April, 2016, 07:07 AM
Nope, no 2015
zckariya70
29th April, 2016, 07:14 AM
2015 Vw polo, can be able to do with avdi
super jumbe
29th April, 2016, 07:22 AM
Hy All,
I would like to know whether you are able to do Avdi the mileage correction?
Kari
To answer your question not yet, there is a tool which can do mileage to new vag cars up to 2016 but you need to take dash out to do them, then you can programme by obd.
zckariya70
29th April, 2016, 07:24 AM
To answer your question not yet, there is a tool which can do mileage to new vag cars up to 2016 but you need to take dash out to do them, then you can programme by obd.
yes exatly there will be service mode after 2010 , so need to remove the cluster from the vag cars , but he asked can be do with avdi or not
kari11
29th April, 2016, 08:38 AM
Nope, no 2015
What tools can do that?
H2Deetoo
29th April, 2016, 09:12 AM
Please post exact partnr and version.
diga1
29th April, 2016, 11:49 AM
smelecom vag pro pakage can doo lot of vag after 2010
kospoz
29th April, 2016, 12:22 PM
I have read that dp4 can do vw group up 2014 model.http://diagprog4.com
PremierD
29th April, 2016, 12:26 PM
:roflmao: .... they have been known to tell porkies mate ....lol
paskuale
29th April, 2016, 12:42 PM
To answer your question not yet, there is a tool which can do mileage to new vag cars up to 2016 but you need to take dash out to do them, then you can programme by obd.
Hello mate, what tool do you means ?
I have AVDI and can confirm that clusters NEC+24C64 after 6.2014 are not supported yet.
I tried to enter service boot mode on A1 cluster (11.2015) and no way !
I will send cluster to them to test it...
super jumbe
29th April, 2016, 05:02 PM
Hello mate, what tool do you means ?
I have AVDI and can confirm that clusters NEC+24C64 after 6.2014 are not supported yet.
I tried to enter service boot mode on A1 cluster (11.2015) and no way !
I will send cluster to them to test it...
smelecom vag prog.
PremierD
29th April, 2016, 05:53 PM
Tommy Cooper .. surely can do them ... lol lol lol just like that ....
paskuale
29th April, 2016, 09:09 PM
smelecom vag prog.
Mate are you sure that smelecom can do VAG 2016 ?
I know it can do VAG MQB until 6.2014 (only VDO, not JCI).
hass42
30th April, 2016, 03:48 AM
My Digimaster 3 has done 4 of them over 2010. All NEC via obd
Hass42
kari11
30th April, 2016, 02:25 PM
Thank you a lot of information. So it makes no sense to buy it in the AN044 feature. Smok can not do?
Landetos
30th April, 2016, 02:37 PM
I have read that dp4 can do vw group up 2014 model.http://diagprog4.com
Breaks my balls...
Landetos
30th April, 2016, 02:38 PM
Mate are you sure that smelecom can do VAG 2016 ?
I know it can do VAG MQB until 6.2014 (only VDO, not JCI).
Nobody can do "Vag"2015 2016 at the moment...
A6 A7 etc are Vag too and 2015s work ok 👍🏻
paskuale
30th April, 2016, 02:42 PM
Nobody can do "Vag"2015 2016 at the moment...
A6 A7 etc are Vag too and 2015s work ok
I know the same as you.
No tool can do VAG with NEC cluster (A1 - Q3 - A3 8V - Golf 7) after production date 6.2014
I know A6 - A7 are ok, but they have different cluster with 95320
raf0468
1st May, 2016, 01:25 AM
smelecom vag pro pakage can doo lot of vag after 2010
had plenty vdo golf7 octavia3 vdo not go with smelecom versions not covered yet.
mouss
5th November, 2016, 10:49 PM
i confirm that i have polo year 2015 and smelecom can't do it dp4 too and avdi too dash vdo made in spain it's 35xxx
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.