PDA

View Full Version : EDC17 Locked Audi A5 3.0TDI



twchnodictator
29th April, 2016, 08:00 PM
Hello mates,

just got in my hands Audi A5 with EDC17CP04 and locked ECU by mpps (as I think) by some "chiptuner".

Have original file (read via OBD) from this car in my hands, but what should I do to save this ECU?

Can I write original file via Boot Mode and Galletto54?

Thanks in advance.

Ori file here 372707


Bosch
1037510328

kalif
29th April, 2016, 08:47 PM
Boot mode is not the same file as OBD read....

twchnodictator
29th April, 2016, 08:48 PM
Boot mode is not the same as OBD read....

what should I do so? Any advices?

kalif
29th April, 2016, 08:52 PM
EDC17 and obd write witch china is always problem. You must open ecu and read ecu via boot mode and compare with your obd read. Then remake file or find ori boot mode file and try it write. Better with ori tool

twchnodictator
29th April, 2016, 09:02 PM
EDC17 and obd write witch china is always problem. You must open ecu and read ecu via boot mode and compare with your obd read. Then remake file or find ori boot mode file and try it write. Better with ori tool

Can you help me with redoing it?

kalif
29th April, 2016, 09:04 PM
read it via bootmode and post

kalif
29th April, 2016, 09:14 PM
first try write ori what you read before via obd. - Use good car charger to higher voltage -

twchnodictator
29th April, 2016, 09:36 PM
read it via bootmode and post

I read via boot mode. Here it is 372726

twchnodictator
29th April, 2016, 09:48 PM
read it via bootmode and post

All what I have read with eeprom372728

kalif
29th April, 2016, 09:50 PM
Some kind of tuning... who made this bad file? It is bad set
I will try do your repair ori boot mode file....

twchnodictator
29th April, 2016, 10:15 PM
Some kind of tuning... who made this bad file? It is bad set
I will try do your repair ori boot mode file....

I do not know who made it. I have car already with this problem. Owner wanted to make chiptuning in some garages. Quick and cheap :chuncky: Super profit as wee see

kalif
29th April, 2016, 10:21 PM
Yes. This is really bad set tuning. The car is clever!! resists this mod and ecu dead.
I am working on your file now....

twchnodictator
29th April, 2016, 10:27 PM
Yes. This is really bad set tuning. The car is clever!! resists this mod and ecu dead.
I am working on your file now....

I can write only flash_all. Galetto v54 gives me no possibility to write only EXT Flash

kalif
29th April, 2016, 10:41 PM
This ecu does not have external flash.....

kalif
29th April, 2016, 10:43 PM
You should write int flash after you receive repair file

kalif
29th April, 2016, 10:57 PM
check your pm

ciekawy
29th April, 2016, 11:29 PM
password pw

twchnodictator (http://www.digital-kaos.co.uk/forums/member.php/446175-twchnodictator)

pm box is full

CustomCars
30th April, 2016, 08:31 AM
Any info, all working ? Car should be easy to restore

twchnodictator
30th April, 2016, 08:48 AM
password pw

twchnodictator (http://www.digital-kaos.co.uk/forums/member.php/446175-twchnodictator)


pm box is full


I cleaned it. Can you repeat?

CustomCars
30th April, 2016, 10:09 AM
Kalif before give you file, still problem ?

twchnodictator
30th April, 2016, 06:32 PM
Mates, reporting. Files do not want to be uploaded (sent by Kalif or ciekawy no diffrence).
Uploads only file that was in ECU before...what is the problem?

twchnodictator
30th April, 2016, 07:49 PM
Made a file by my own. Can somebody check it?

File :372859

yanko8605
30th April, 2016, 08:19 PM
I have ori of my q7 same ECu same engine ... if want just write me

twchnodictator
30th April, 2016, 08:21 PM
I have ori of my q7 same ECu same engine ... if want just write me

Upload please if it's not hard for you.

twchnodictator
1st May, 2016, 05:48 PM
Mates, ecu is still blocked or something. I tried to write files with galletto 54 like
WRITE ALL (eeprom+flash)
Write Int Flash (flash only) different files but no success
Write EEPROM (first flash than eeprom and eeprom than flash)

Gives no difference. When I put ECU in the car cooling fans working on max power and no connection with ECU at all.

Does someone knows where could be the problem?

Fantomisback
1st May, 2016, 10:06 PM
yes i think your ecu is dead

mihaiservice
2nd May, 2016, 12:34 AM
If you still can read/write tricore mcu with Fgtech than CAN BUS are alive ,just use any new or old calibration file with ODIS 5.012

tunertool
2nd May, 2016, 01:44 AM
What year is the car?

twchnodictator
2nd May, 2016, 07:49 AM
Year is 2007

twchnodictator
2nd May, 2016, 07:50 AM
yes i think your ecu is dead

Don't thinks so, ECU can still read/write via BOOT MODE

twchnodictator
2nd May, 2016, 07:53 AM
If you still can read/write tricore mcu with Fgtech than CAN BUS are alive ,just use any new or old calibration file with ODIS 5.012

Can you tell more info? What ODIS can do? Via OBD ecu is not responding.

kospoz
2nd May, 2016, 12:16 PM
Can you tell more info? What ODIS can do? Via OBD ecu is not responding.

You have communication with vcds or other tool?

twchnodictator
2nd May, 2016, 12:28 PM
You have communication with vcds or other tool?


Via OBD2 no communication at all. A lot of errors on the dash and fans working on max power.

morgano
2nd May, 2016, 02:21 PM
Take original MPPS reading, open it on Hex Editor. Open the first reading you made via boot mode, now in MPPS file goto offset 0x180000 mark from there till end of file, and copy block, now open bootmode read, goto offset 0x1800000 and mark from there to the end of file, paste the previously copied block and save. Flash result file via bootmode. Ensure eeprom is the original that is paired with the flash or the ecu never will work fine.

cawadany
2nd May, 2016, 04:10 PM
You can try..... :)

twchnodictator
2nd May, 2016, 04:34 PM
You can try..... :)

Thank you, cawadany

cawadany
2nd May, 2016, 04:49 PM
Thank you, cawadany

No problem... let us know if you solve it....

twchnodictator
2nd May, 2016, 05:00 PM
No problem... let us know if you solve it....

Of course, I will report.

twchnodictator
2nd May, 2016, 08:49 PM
MATES, PROBLEM FIXED WITH THE HELP OF TUNERTOOL!!! REAL PROFESSIONAL! For some hours he fixed the car ECU ruined by ~~~~ tuners.

Thanks everybody for tries and advices!

373171

tunertool
2nd May, 2016, 08:57 PM
No problem glad you got it solved :)

cawadany
2nd May, 2016, 09:17 PM
Very helpfull for the forum! [emoji6]

mb7361
9th June, 2016, 02:53 PM
quote TUNERTOOL solved problem edc17cp04 locked in ten minuts is the best in this problems and very nice person i'm glade to meet him thanks again tunertool