PDA

View Full Version : Need dump 24c08 for kenwood 9280


ipred
30th April, 2016, 11:31 AM
Requires firmware DUMP 24c08 (RP 408)
shooting
30th April, 2016, 11:36 AM
Requires firmware DUMP 24c08 (RP 408)

Where's your dump?

wbr
ipred
30th April, 2016, 12:22 PM
The device is out of order. The device does not turn on, but initializing the processor and flash memory is present. Probably you need a flash dump.
shooting
30th April, 2016, 12:47 PM
The device is out of order. The device does not turn on, but initializing the processor and flash memory is present. Probably you need a flash dump.


Just read the 24c08 eeprom and post here..

wbr
janekd69
23rd November, 2023, 07:37 PM
Hello i need the code radio to Kenwood DNX9280BT 24C04 404RP
Raimax
23rd November, 2023, 07:47 PM
Hello i need the code radio to Kenwood DNX9280BT 24C04 404RP

The code is here H27U2G8F2CTR Hynix IC418