NEED help for sync a EWS4.3 Dump

[JFR-Tuning]

Hi M8

please i need help need from BMW expert ,, original EWS4.3 burned and cant be readed.

I take from here a DK Dump of EWS4 and write with AK90 the VIN. But not alligment the DDE ( EDC16+) and EWS4
also were fine if the old keys i have post also the dump can be used

Please can make anny M8 a Dump for this ews
km 105 tkm ok

[JFR-Tuning]

@bram i think You ATE the Spezi for this

[bearheroes]

try and report...use avdi or inpa to sync

[JFR-Tuning]

Pass please ...

Can i use the old Keys?

i think i Must learn to Play with BMW EWS and CAS Tools :girlshoite:

[koncimobil]

Old keys can't reuse, if else you know key password

[JFR-Tuning]

Can i Read it out of the Keys? I have AVDI and Ak90.

i can not Check the dump from Bearheroes. He forget the pass

[JFR-Tuning]

If i have a vergin dump of EWS is it posibble? Because If You buy new EWS from Dealer You can Used old Keys?

[JFR-Tuning]

Please pass ?

[Fallen]

If i have a vergin dump of EWS is it posibble? Because If You buy new EWS from Dealer You can Used old Keys?

No such thing as virgin dump, all EWS are vin coded, that's why the keys work.

[JFR-Tuning]

I Test it,

not work with Org Keys

will Look to make a new Transponder , wich Kind i have to use for EWS 4.3 normal key with Metal 3 Button

[mikeg332]

anyway someone can take a look at this ews 4.4 dump and let me know if there is something wrong with it? i was able to read it once. went to go make key with ak90 and it appears the eeprom in the ews 4.4 is empty now. it will only go to 7 percent then write error? please advise would be much appreciated!