PDA

View Full Version : MB W211 2005 Mileage correction instructions



alkaskad
7th May, 2016, 08:10 PM
Hello guys!
I'm about to do mileage on this car, but i never did MB, except ones with dash flash. I know that i need to do EZS, assyst,bcm,ecu, and battery...but i would like to ask experts how to do it.
My toolbox contains:
Carprog original
R270
Xprog m 5.5.1 reworked clone
NYO

I'm not so worried about dash and ezs,but i would like to make this as clean as possible. Thanks in advance!

madzar
7th May, 2016, 09:25 PM
read cluster eeprom and corect it with nyo or carprog;
with r270 or X-prog change EZS km;
ZGW you can change km with carprog
,for ecu you need BDM 100 or similar tool
,or risk to open ecu and change km in eeprom for BOSH ECU;
for batery module you need AVDI or FVDI
;There is hours in airbag module;
and check ESP with Star.

alkaskad
7th May, 2016, 09:46 PM
Dont have star and avdi...can i do it manually?

koyot
7th May, 2016, 10:09 PM
easy make all obd with dp4:chuncky:

alkaskad
7th May, 2016, 10:24 PM
And don't forget to inflate spare tire... :)

UPDATE: made cluster,ezs ok. But carprog assyst obd is not clear to me,when i press read odometer, it reads incorrect mileage, i tried to adjust oil changes and number of services but it's all messed up... Can someone explain it to me?

I tried to open ecu, but no success...

madzar
8th May, 2016, 09:12 PM
when you read assist with carprog it shows mileage of last service in it.Clear oil services and put actual mileage that you already put in cluster and ezs.

alkaskad
8th May, 2016, 09:20 PM
I had 386xxx on dash before correction, and carprog reads 68xxxx so i didn't touch that. I put new mileage i oil services and 10 oil changes and 11 services.transfer that and write...

vrsc
8th May, 2016, 10:06 PM
easy make all obd with dp4:chuncky:

EZS OBD ???

vrsc

alkaskad
9th May, 2016, 05:45 AM
EZS OBD ???

vrsc

Alien nanotechnolgy mate! :)

Here is a screen from my carprog assyst: 374365

Is that ok?

vrsc
9th May, 2016, 09:43 PM
Hello,

Assyst OBD is ok, work. W211 2005 EZS don't work OBD....

vrsc

madzar
9th May, 2016, 09:59 PM
You will nead Star to check actual values in ZGW assist and assist plus.Then it is easy to understand and make cahges to zgw.First make backup of ZGW you can not damage nothing even if you put different dump in it.for test find content of same number ZGW just change VIN.
But you must have Star or good diagnostic for mercedes to see actual values.