Log in

View Full Version : Ecu 5th immo in cluster 4th immo?


LauAlf
8th May, 2016, 08:08 PM
Good,

I was to generate login for EDC17C64.

But this ecu says only huh CS to be 5th immo.

Er way to adapt a imoblizador A3 8P 4th immo?

I want to build a 2.0 TDI CR CUW or CUNA 184 ps in my car but I'm afraid after failing to adapt the immo :mad-new:
LauAlf
8th May, 2016, 08:14 PM
374278

Calculater vvdi
rob h
9th May, 2016, 07:01 AM
Not possible, to adapt. Immo of might be the easiest solution.
Or put all components of a 8V in your car, including wiring.
LauAlf
11th May, 2016, 01:04 AM
Not possible, to adapt. Immo of might be the easiest solution.
Or put all components of a 8V in your car, including wiring.
For, I even did not mind staying with immo off.

The problem is that there is no way to make as the EDC16 in EPROM, and the cluster will stick to the safe, would have to get an emulator to fool the cluster.

But I will put a new head on my engine and keep the PD.

I am waiting for me to arrange one EDC17C64 and then try to test bench, in the future we'll see: P
yugo45
11th May, 2016, 06:12 AM
Not possible, to adapt. Immo of might be the easiest solution.

On Immo 5 not possible Immo off. At least not yet.


For post #2:

CS is 16 byte , not only 6 as first picture show.
LauAlf
12th May, 2016, 05:08 AM
On Immo 5 not possible Immo off. At least not yet.


For post #2:

CS is 16 byte , not only 6 as first picture show.

16Cs will be not only for the transponder and cluster?
yugo45
12th May, 2016, 05:25 AM
That is the only thing ECU has , 16 byte CS.
No pin, No MAC in Immo 5