PDA

View Full Version : LANDROVER DISCOVERY II TD5 2000r NEED EKA CODE


marek128
12th May, 2016, 04:53 PM
Hi again.

I got that car for immo off. Engine starts ok but this ff......g anti theft system flash markers and peeeb horn all time. So need disarm but after 8h looking for some materials in google i give upp. I readed all units and tryed "7623" founded in fusebox but not worked.
Mybe some dump with diarmed system?
marek128
13th May, 2016, 08:11 AM
Any hawe idea how to calc this fuuking code? Or disable the alarm?
PremierD
13th May, 2016, 08:21 AM
Contact stealer .. give vin .. cross his hand with some silver .. job done mate
marek128
13th May, 2016, 08:37 AM
So no opition for calc pin from dumps? Mybe some wire to ground make effect? Readed somewhere that blue/green wire to ground disarmin alarm but was onli scammig i thing, for me basicly not worked. If no luck i make turnsignals out this unit and cut wires, same as horn. onlu windows stay connected.
PremierD
13th May, 2016, 08:50 AM
It will be stored in the HC 11 ...84pin MCU in the BSI mate .. but where is another matter
marek128
13th May, 2016, 09:06 AM
What happen when i put dump from unit with disarmed state? And where to get it? :)
ezezeppelin
15th May, 2016, 01:19 PM
i think discovery 1 with Lucas AS10 have EKA Code, but discovery 2 using the keyfob with the same shape of Rover 75 and old mini cooper, doesn't use EKA Code. You need a programmed fob or remove manually the alarm cutting wires
marek128
16th May, 2016, 09:13 AM
u cant cut, is in bcu, windows lights etc will stop working. EKA working becuse when i do procedure horn beeps like it should, led in instrumemt as well.
just4upal
16th May, 2016, 09:43 AM
i found this pin in the HC11PH8(0H30R_BCU_IN_01_ORI.bin

may be it will help


375705
marek128
16th May, 2016, 12:37 PM
THX bro ur code worked alarm disabled!!!
Elektrik001
28th June, 2016, 10:43 AM
THX bro ur code worked alarm disabled!!!

good job!!! Thanks
jorge antunes
1st December, 2019, 05:15 PM
Dear friends, and possible read code eka by dump mcu hc11ph8 bcu land rover discover 2 and undo the protection system I already have immo off in the engine ecu
Dear friends and possible read code eka by dump mcu hc11ph8 bcu land rover discover 2 and undo the protection system I already have immo off in the engine ecu
rokibar
2nd December, 2019, 08:13 AM
Dear friends, and possible read code eka by dump mcu hc11ph8 bcu land rover discover 2 and undo the protection system I already have immo off in the engine ecu
Dear friends and possible read code eka by dump mcu hc11ph8 bcu land rover discover 2 and undo the protection system I already have immo off in the engine ecu
AE6F / 10-14-6-15