View Full Version : Checksum Correction please
evisdaci
15th May, 2016, 08:46 AM
I have a EDC15C7 from a fiat doblo 1.9, and i want to write the flash 29F400BT with TL866A with original adapter. But when i try to write is impposibile. So i have need to make checksum correction for this dump please.
kalif
15th May, 2016, 09:44 AM
checksum is ok
kalif
15th May, 2016, 09:50 AM
YOUR MOD IS VERY BAD. DO NOT PUT IT INTO THE CAR!!!!!
evisdaci
15th May, 2016, 10:57 AM
This dump is from a correct ECU. With this file car work perfectly. I want to clone the ECU but I can't write file on ECU that I want to clone. I have tl866a programmer
kalif
15th May, 2016, 11:15 AM
try another programmer
evisdaci
15th May, 2016, 11:40 AM
I have tried but no success. I have galleto v54 and I try in boot mode and via OBD but nothing, this ECU not communicate with programmer, so I accept to remove the flash (29f400bt) to re-write with tl866 but I can't write, this flash is new I buy the new because I mind the ecu flas is damaged. I don't know why tl866 can programm this flash. I can read but no write
thayer201
15th May, 2016, 11:53 AM
I have tried but no success. I have galleto v54 and I try in boot mode and via OBD but nothing, this ECU not communicate with programmer, so I accept to remove the flash (29f400bt) to re-write with tl866 but I can't write, this flash is new I buy the new because I mind the ecu flas is damaged. I don't know why tl866 can programm this flash. I can read but no write
have you erased all and blank checked? before write.
evisdaci
15th May, 2016, 01:49 PM
Yes, i have erase before and writing. I don't know why. When i try an example dump file with a small size (just exaple, not correct dump) i can be write, but when i try a correct file like file that i have post i cant mate
kire86
15th May, 2016, 01:50 PM
Try with MPPS in recovery mode
evisdaci
16th May, 2016, 01:47 PM
I haven't MPPS my friend
evisdaci
16th May, 2016, 10:09 PM
thayer201 (http://www.digital-kaos.co.uk/forums/member.php/389877-thayer201)
, i have try what you suggest me but nothing, follow i attach the photo of problem. Have you any idea ?
thayer201
16th May, 2016, 10:52 PM
thayer201 (http://www.digital-kaos.co.uk/forums/member.php/389877-thayer201)
, i have try what you suggest me but nothing, follow i attach the photo of problem. Have you any idea
make sure your selecting the correct chip.... either amd AM29F400BT or st M29F400BT not what you have selected in the picture then try again
i would do
re-open soft
erase twice to be sure
blank check twice and verify
then try to write.
evisdaci
16th May, 2016, 11:36 PM
It's the same situation mate.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.