mercedes w210 key's help

[simplo]

Hi guys please help me for this key's calculation .if possible Motorola and nec format
The car is a w210 and.....thank's

[daxxer]

Hi guys please help me for this key's calculation .if possible Motorola and nec format
The car is a w210 and.....thank's

...wait a moment.... will be finished .21 and .51 format... okey ?

:
375790

[simplo]

Great daxxter , the file is loked with password

[daxxer]

Great daxxter , the file is loked with password

locked...yes...for your security....pass you have in PM

[simplo]

Hi it seems like i have a faulty ezs i have write all those key without succes now i want to adapt ecu to this second hand ezs with same part number
208 545 01 08 but i found it without any key i will appreciate if you can calculate keys again for this dump.
I have even swaped the two mcu but ....

[simplo]

ecu number bosch 0281 001 621

[daxxer]

Hi it seems like i have a faulty ezs i have write all those key without succes now i want to adapt ecu to this second hand ezs with same part number
208 545 01 08 but i found it without any key i will appreciate if you can calculate keys again for this dump.
I have even swaped the two mcu but ....

which type of keys mate ? .21 ? .41 ? .51 ? ;)
with 210 EZS's are only problems...nothing new :(

[simplo]

Thank's for reply , i need same formats like previous non working ezs 021 and 051

Envoy? de mon HUAWEI SCL-U31 en utilisant Tapatalk

[daxxer]

Thank's for reply , i need same formats like previous non working ezs 021 and 051

Envoy? de mon HUAWEI SCL-U31 en utilisant Tapatalk

okey, then both as last time... .21 and .51 , ...be awaiting ;)

...finished ;) ...password the same as before ;)

377939

[rdu04]

try this simplo you have key1 and key2 active
SSID C0E9A790 password 8E808782A2064377

[simplo]

is it possible to turn this ecm dump into autocoding state ? 24c04 previously uploaded or renew ??

[mvekaz]

What is problem with car?
Can you turn on key in EZS?
ESL open or not?
Or you can turn key on EZS, ESL open, but you can not crank?
Maybe is good idea to remove EZS and ESL from car, make key and all test on table.
By the way there is nothing in your ecu zip file.
wbr

[simplo]

What is problem with car?
Can you turn on key in EZS?
ESL open or not?
Or you can turn key on EZS, ESL open, but you can not crank?
Maybe is good idea to remove EZS and ESL from car, make key and all test on table.
By the way there is nothing in your ecu zip file.
wbr

Original ezs was dead .i buyed second hand ezs programmed a key and unlocked esl .i have virginized ecu and try to adapt with star error.. in star menu
I have possible cause: das locked, can , voltage
I've used mb ecu clear to virginise ecu . Key is turning , esl is unlocking , but engine not crancking

[mvekaz]

Try to write eeprom (d69j) from dead EZS to working second hand EZS, so sinhro with ecu remain ( in ecu write original 24c04 dump) .
Also check actual value in ECU with star diagnose.
Communication between EZS and ECU is over CAN, on EZS it is two pins connector.

[simplo]

Allready do that i have writed data from dead ezs to new working one (cpu1,cpu2) the key did'nt turn .anyway thank you
I think best way is paired ezs and ecu dumps