PDA

View Full Version : Help to read/write EDC17CP11 Range Rover 4.4 TDV8 2011



admirid
18th May, 2016, 04:46 PM
Hi


Did somebody try to read this ECU EDC17CP11 from Ranger Rover 4.4 TDV8 2011 with KTAG 6.070, I have KTAG tool EU Clone with 2.11 software version and TRASDATA. On software version 2.11 is not on list this ECU of Ranger Rover but on TRASDATA is on list, did somebody try to read/write this ecu with this firmware with TRASDATA ??

overs0ull
18th May, 2016, 04:49 PM
yes you can use trasdata .
only for chk i cant remember are is calculate them

td5alive
18th May, 2016, 04:50 PM
If you have the protocol selected for 3.0 TDV6/SDV6 EDC17CP11, this will work as too as all these ECU's are the same. :)

I can correct the CHK in OLS if Trasdata won't correct it.

admirid
18th May, 2016, 05:44 PM
Is not any problem i have firmware version 6.070 with software Kess 2.11 and there is not TDV8 model on the software cars list but on trasdata i have this model cars ecu ??

overs0ull
18th May, 2016, 08:07 PM
you trasdata read/write the ecu but before write upload the file here we will fix the chk for you and you can write and all be ok

admirid
18th May, 2016, 08:39 PM
Thanks all for respond :)