new polo abs control unit not coding

[frikki]

hi there dear members. i am struggling to get a abs control module to code. the control unit uses long coding. is there maybe a specific way to get the control unit to code. I have copied the long coding from another vehicle, but control unit still refuses to except the coding. please could some kind member please assist if possible. this is the coding I have copied from another vehicle. 60DD2F63212A04C0061BF471845620000000. many thanks. keep well.


Thursday,02,June,2016,13:59:13:36545
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 8 x64
VCDS Version: 15.7.1.0 (x64)
Data version: 20150904
www.Ross-Tech.com (http://www.Ross-Tech.com)

VIN: AAVZZZ6RZEU018067 License Plate: BAXTER
Mileage: 2440km-1516mi Repair Order:

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Chassis Type: 6R (6N0)
Scan: 01 03 08 09 15 17 19 25 44 56
VIN: AAVZZZ6RZEU018067 Mileage: 2440km-1516miles
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000

-------------------------------------------------------------------------------
Address 01: Engine (J623-CLPA) Labels: None
Part No SW: 03C 906 014 ED HW: 03C 906 014
Component: CLPA-MM7GV H02 3171
Revision: --H02--- Serial number: 00000000000000
Coding: 00110014020400000000
Shop #: WSC 27741 001 1048576
VCID: 63C0D8C661DB792620-513C
No fault code found.
Readiness: 0000 0000
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 6R0-907-37x-ABS82.clb
Part No SW: 6R0 907 379 AD HW: 6R0 907 379 AB
Component: ABS8.2 front H03 0001
Revision: --------
Coding: 000000000000000000000000000000000000
Shop #: WSC 31414 790 31414
VCID: 000AF74A978DC23E5D-8054
2 Faults Found:
01042 - Control Module; Not Coded
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 0
Fault Frequency: 1
Reset counter: 125
Mileage: 2446 km
Time Indication: 0
Date: 2016.06.02
Time: 13:35:36
Freeze Frame:
Hex Value: 0x0005
Hex Value: 0x0000
Hex Value: 0x3013
Hex Value: 0x1499
Hex Value: 0x00FF
Hex Value: 0x007F
Hex Value: 0x7F00
Hex Value: 0x0000
00290 - ABS Wheel Speed Sensor; Rear Left (G46)
012 - Electrical Fault in Circuit
Freeze Frame:
Fault Status: 01101100
Fault Priority: 0
Fault Frequency: 1
Reset counter: 125
Mileage: 2446 km
Time Indication: 0
Date: 2016.06.02
Time: 13:35:36
Freeze Frame:
Hex Value: 0x0005
Hex Value: 0x0000
Hex Value: 0x30B1
Hex Value: 0x0899
Hex Value: 0x00FF
Hex Value: 0x007F
Hex Value: 0x7F00
Hex Value: 0x0000

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels: None
Part No SW: 6R0 820 045 N HW: 6R0 820 045 N
Component: Man AC H02 0202
Revision: 0003SH02
VCID: 397C5AAEB0D753F65A-806C
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 6R0-937-08x-09.clb
Part No SW: 6R0 937 087 K HW: 6R0 937 087
Component: BCM PQ25 H+4 H46 0256
Revision: BF046001 Serial number: 0434 280120225
Coding: 3DB02BBF08F324009A380800242B0CD00040410F6004000020 0000000000
Shop #: WSC 00000 576 76175
VCID: 4584265ECC2F27162E-8010
Subsystem 1 - Part No SW: 6R0 959 802 AB HW: 6R0 959 802 AB Labels: 6R0-959-802.CLB
Component: J386__TSG_FT 008 1611
Coding: 18BC30
Subsystem 2 - Part No SW: 6R0 959 801 AD HW: 6R0 959 801 AD Labels: 6R0-959-801.CLB
Component: J387__TSG_BT 008 1611
Coding: 18BC30
Subsystem 3 - Part No: 1K8 951 171 A
Component: DWA-Sensor 00 001 0103
Coding: 000000
Subsystem 4 - Part No: 1K8 951 605 B
Component: LIN BACKUP HO H11 9005
Coding: 000000
Subsystem 5 - Part No SW: 6R0 959 591 B HW: 6R0 959 591 B
Component: J245 PS72.023 H02 0007
Coding: 081001
Subsystem 6 - Part No: 1K8 951 171 A
Component: DWA-Sensor 00 001 0103
Coding: 000000
Subsystem 7 - Part No SW: 5K0 959 542 C HW: 5K0 959 542 C
Component: E221__MFL-TAS H31 0037
Coding: 020000
Subsystem 8 - Part No SW: 6R0 959 811 G HW: 6R0 959 811 G
Component: J388__TSG_HL 008 1611
Coding: 18BC32
Subsystem 9 - Part No SW: 6R0 959 812 G HW: 6R0 959 812 G
Component: J389__TSG_HR 008 1611
Coding: 18BC32
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5K0-959-655.clb
Part No SW: 6R0 959 655 K HW: 6R0 959 655 K
Component: VW10Airbag028 H10 0020
Revision: -------- Serial number: 003GX01WW5D6
Coding: 003238
Shop #: WSC 31414 790 31414
ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
ROD: EV_AirbaVW10BPAVW250_SE25.rod
VCID: 4A9E1562ED31C86EC3-801E
Crash sensor for side airbag; driver side:
Serial number: 3575HRB405D14TPI5HD.
Crash sensor for side airbag; front passenger side:
Serial number: 3585HRB405F1KADS81V/
Crash sensor for side airbag; rear; driver side:
Serial number: 3515RRB405P1AP60BHHS
Crash sensor for side airbag; rear; passenger side:
Serial number: 3525RRB405L1AP6078LG
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 6R0 920 860 M HW: 6R0 920 860 M
Component: KOMBI H04 0709
Serial number: 00000000000000
Coding: 140800
Shop #: WSC 31414 790 50316
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
ROD: EV_Kombi_UDS_VDD_RM09_SK35.rod
VCID: 3E7649B2A1F974CE6F-806A
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway
Cannot be reached
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H04 0709
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
ROD: EV_Immo_UDS_VDD_RM09_SE25.rod
VCID: 6ADEB5E28DF1286EE3-803E
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J792) Labels: 6Rx-909-144-V1.clb
Part No SW: 6RF 909 144 K HW: 6RF 909 144 J
Component: EPS_ECU H44 0401
Coding: 0000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_SteerAssisUDSNSK 005005
ROD: EV_SteerAssisUDSNSK.rod
VCID: 54A20B1A3F758E9EA9-8000
No fault code found.
-------------------------------------------------------------------------------
Address 56: Radio (J503) Labels: 5M0-035-1xx-56.clb
Part No SW: 5M0 035 156 D HW: 5M0 035 156 D
Component: Radio H54 0107
Revision: R0000000 Serial number: VWZAZ1N6359677
Coding: 0500040002
Shop #: WSC 31414 790 31414
VCID: 2A5E75E24571E86E23-807E
No fault code found.
End-------------------------(Elapsed Time: 02:55)--------------------------

[synkrotronic]

searched... try here maybe you get help from member :http://www.digital-kaos.co.uk/forums/showthread.php/431711-VW-Polo-6R-2012-Abs-Esp-Coding-6R0-907-379-BC

[morfej]

frikki: try 210228E3416E00BA842714EA82DA00501300

[rob h]

The abs code comes matches with the instument clusters data.
Always safe abs coding before you change anything concerning the cluster.

It is possible to calculated until about 2014. The newer Vag models need to be taken do the dealer.

[morfej]

rob : ... it match with cars VIN ... nothing else as I know.

[frikki]

frikki: try 210228E3416E00BA842714EA82DA00501300
wiil report and let you know my dear friend. keep well.

[ungurbulan]

Have you checked / try to repair that spped sensor issue?
As I know coding is done just if you don`t have other fault codes.

[frikki]

Have you checked / try to repair that spped sensor issue?
As I know coding is done just if you don`t have other fault codes.

If I erase fault codes dear friend, faults go away for some time. abs then shows no fault codes. thanks

[frikki]

frikki: try 210228E3416E00BA842714EA82DA00501300

hi dear friend. codes gets rejected by abs controller. any other suggestions dear friend. many thanks for assistance. keep well.

[morfej]

you have a chance to read any other car abs coding from you country ? ... with same abs unit and same car.

[frikki]

you have a chance to read any other car abs coding from you country ? ... with same abs unit and same car.


im sure I will dear friend. do you need just the long coding or a scan of the abs control unit. thanks for support.

[frikki]

you have a chance to read any other car abs coding from you country ? ... with same abs unit and same car.

the coding we get was from a sedan my friend. long coding. 60DD2F63212804C0061BF471845620000000. HOPE THIS HELPS DEAR FRIEND. KEEP WELL. THANKS

[frikki]

any member have suggestion what to do or to try. many thanks.

[rob h]

You need to close the vcds abs session and reopen, it everytime that you put in a new longcode.

If not, it will also reject the correct code.

[frikki]

You need to close the vcds abs session and reopen, it everytime that you put in a new longcode.

If not, it will also reject the correct code.

thanks friend. could you maybe help with the correct long code.

[frikki]

is any member be able to assist with the long coding of this vehicle abs pump. thanks.:giveup:

[frikki]

I forgot to mention that the vehicle were with the agents for coding!! agent tried different used abs controllers. no luck that side!:banghead::banghead::banghead::banghead: :dead:

[MJRVR]

Can't you use the coding from the old module?

[frikki]

Can't you use the coding from the old module?

they were swopping clusters around without knowing the long coding will be lost dear friend. original coding lost. thanks. keep well.

[morfej]

You really can't find any other polo from your country that has
ECU 03C 906 014 ED
ABS 6R0 907 379 AD ABS8.2

as the one you give before doesn't look ok... and also with the coding from other car a VIN number would be needed.

br

[frikki]

[QUOTE=morfej;2788952]You really can't find any other polo from your country that has
ECU 03C 906 014 ED
ABS 6R0 907 379 AD ABS8.2

as the one you give before doesn't look ok... and also with the coding from other car a VIN number would be needed.

I will be getting a polo with coding and vin nr. soon dear friend. many thanks. keep well.

[frikki]

[QUOTE=morfej;2788952]You really can't find any other polo from your country that has
ECU 03C 906 014 ED
ABS 6R0 907 379 AD ABS8.2

as the one you give before doesn't look ok... and also with the coding from other car a VIN number would be needed.


Address 03: ABS Brakes Labels: 6R0-907-37x-ABS82.clb
Control Module Part Number: 6R0 907 379 AD HW: 6R0 907 379 AB
Component and/or Version: ABS8.2 front H03 0001
Software Coding: 200200E3006D00B6042500E900D600000000
Work Shop Code: WSC 31414 790 31414
VCID: 000AF74A978DC23E5D-8054
vin from another vehicle: AAVZZZ6RZCU004075

hope this helps dear friend. many thanks. keep well.

[morfej]

For your VIN the coding base on that info above should be:

200200E3006E00BA042500E800D800000000

[frikki]

For your VIN the coding base on that info above should be:

200200E3006E00BA042500E800D800000000

will try and let you know dear friend. many thanks.

[frikki]

For your VIN the coding base on that info above should be:

200200E3006E00BA042500E800D800000000


wow many many thanks my dear friend. you are a genius!!!!!!!!!! it worked wonderfull!!!!!!! GOD bless!! :congrats::smile-new::smile-new::dancing::party: