PDA

View Full Version : VW Crafter EDC16 need ori or chek this file



carbon7319
3rd June, 2016, 08:46 PM
VCDS doesn't want to connect , MPPS no ID , Galletto V53 no ID via OBD.
Car run ok.
Autocom/Delphi ok connection and diagnostic and no errors.
I read files via BDM.
Please someone to chek this files and if possible send me ori file.
0281013698
074906032AE
sw 503922

379400

mariusica_boy
3rd June, 2016, 09:23 PM
Your file is tuned an OBD PROTECTION ON.(for this is blocked read OBD)
U need make update with VAS or reconstruction flash file original.
I do not have your file same number software for reconstruction.
Maybe someoane put here ori file with same nr hardware and software.

carbon7319
3rd June, 2016, 09:37 PM
Thanks mariusica_boy , now let's hope that someone hawe ori file.

dijo
3rd June, 2016, 10:18 PM
Thanks mariusica_boy , now let's hope that someone hawe ori file.

I think this will help...

carbon7319
3rd June, 2016, 10:22 PM
Thanks dijo but this sw is 381806

dijo
3rd June, 2016, 10:32 PM
m8, you can flash your ECU with this file, and than by Odis or similar tool update...
you can see SW version after flashing...

cawadany
4th June, 2016, 07:08 AM
I don't think it's a problem of obd read protection. With obd read protection you can diag with vcds, and you can id with tool like mpps or galletto.
I see your flash has cks corrupted. Try to write only flash in bdm, and let your tool to correct checksum.

carbon7319
4th June, 2016, 03:49 PM
Result

Writing file and cheksumm with BDM 100 - car not start , read after that winols say 9 cheksumms incorect
Writing file and cheksumm BDM with Galletto V53 - car start work ok no comunication , read after that winols say 1 cheksumm incorect.
Writing file BDM with Galletto V53 and cheksumm with WinOls - car start work ok no comunication , read after that WinOls say cheksumm correct.

Help Masters .........