PDA

View Full Version : Galletto error



Mdal
4th June, 2016, 10:45 PM
Hi all,

Tried writing my ecu with galletto 1260 today! It seems to read the old file ok but when I try to write it with a new one it comes up with error sk:-1 seed error? Does anyone know what is causing this error?

Many thanks Darren

Sent from my SM-G900F using Tapatalk

hcwc
4th June, 2016, 11:45 PM
Make sure that you have more than 13V, what car is it ? also make sure that you have chosen proper protocol/car or try with another

Better buy although galletto 54, maybe something's wrong with your cheap tool

Mdal
5th June, 2016, 07:31 AM
It's a mercedes ml 270 cdi 2000

Sent from my SM-G900F using Tapatalk

sdtsedat
5th June, 2016, 02:44 PM
Try with another tool, Error sk 1 is "connection not available" fault.
Galletto 1260 is bad for use chiptuning..

Greetz from Belgium

Tachodiag
5th June, 2016, 06:33 PM
are the vents starting ?

wiski
5th June, 2016, 07:04 PM
Actually that old bugger is not so bad for old cars but for this you should take off the flash and use programmer.

Sent from my SM-A510F using Tapatalk

Mdal
6th June, 2016, 03:51 PM
Thanks for your replies, the fans do go flat out!!

Sent from my SM-G900F using Tapatalk

Mdal
7th June, 2016, 10:11 AM
Right plugged it in to a kwp2000+ even worse comes up with error timing parameters! Won't even read the ecu! Pulled ecu out of the car and tried to do it on the bench using kwp2000+ and get (no kick found!) Any help welcome lol! Also the galletto 1260 came up with a seed key error, no sure if this has something to do with the sk1 error?

Sent from my SM-G900F using Tapatalk

bobolin4o
7th June, 2016, 10:45 AM
Still the engine start after all this?
If yes, do not bother anymore with those ~~~~ty tools...
Regards!

Mdal
7th June, 2016, 10:56 AM
Lol I like your style

Sent from my SM-G900F using Tapatalk

bobolin4o
7th June, 2016, 10:59 AM
Lol I like your style


I give my best! :)

Cheers!

bobolin4o
7th June, 2016, 11:11 AM
Mate, open the ECU and maybe you'll find something like this in it...
Reading through OBD is possible, writing - is not.

379931

379932

Mdal
7th June, 2016, 11:32 AM
When it is apart it does look something like that! But where do I go from there? Lol

Sent from my SM-G900F using Tapatalk

Mdal
7th June, 2016, 11:35 AM
I have made up leads to connect onto the pins e.g power, ground and kline!!

Sent from my SM-G900F using Tapatalk