VAG immo emulator

[aaruncee]

Hello,

I have bought VAG immo emulator from this site:
Sale OBD-II, UniScan, CarSoft BMW v.6.5 Crack Mersedes v.7.4 EPROM Burners and ect... for Sale (http://www.minsk555.narod.ru/index.htm)

They send to me just Atmel Attiny2313 chip and schematic. I tried read this chip dump with upa-usb, but upa-usb read it like blank dump.
Maybe who have dump for this emulator?

Thanks

[szwajcarek]

Well this dump is protected against reading. Here is an schematic that I have for atmel 89c2051 but I have not tested it.
Regards

[aaruncee]

Well this dump is protected against reading. Here is an schematic that I have for atmel 89c2051 but I have not tested it.
Regards


Thanks, have anyone tested version of vag emulator?

[apaz]

Hello,

I am looking for schematic & dump of the vag emulator.

I have relevant programmer for atmel.

Otherwise does anybody have the data exchange information for writing your own software.

Thanks

[ggpanos]

Well this dump is protected against reading. Here is an schematic that I have for atmel 89c2051 but I have not tested it.
Regards

I have test this emulator and does not work... :(

[pecirepi]

would you send it to my e-mail i dont have enough permission. Thank you.

[aaruncee]

Renault and Fiat immo emulators

[strizek]

thank you for your files

[strizek]

renault emu working

[FlyJet]

I have another VAG emulator

[aaruncee]

I have another VAG emulator

Can you post it?

[Master01]

Renault and Fiat im*o emulators

đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

[teerak2uk]

Got a possible prob on a Skoda felicia (1996) with the vag immo box with transponder key which i think has some problem and wanted to know how to bypass i was sure on these it is only a cae of a bit of wiring 10-15 minutes can someone give me a pointer

regards


Basically car was running and just cut out and has no spark

[gUeRRa]

I have bought VAG im*o emulator from this site:
It is our ATTINY-2313 based Emu for Im*o-1 and-2 of VAG. It cannot work with further versions of Im*o like -3 & -4 generation

[gizmo666]

I am also looking for schematic & dump for working vag emulator if someone like to share;)

[mihal64]

ATTINY-2313 based Emu for Im*o-1 and-2 of VAG.plis is fuse bits pony prog2000.

[pnj]

Does anybody have this VAG Immo Immolator working dump they wants to share or sell ?
pls replay or pm if possible:burnout:

[mihal64]

ATTINY-2313 based Emu for Im*o-1 and-2 of VAG.plis is fuse bits

[BATONS]

can you sent me hardware end hex in pw
very thanks

[mihal64]

whether it works

[stevan]

I have see VW emu but only with PIC

[mihal64]

also looking for schematic & dump for working vag emulator 1- and 2 if someone like to share

[mihal64]

also looking for schematic & dump for working vag emulator 1- and 2 if someone like to share ATTINY 2313 PLISS

[mihal64]

Hi do you have to Bina ATtiny2313 vag im*o emulator is podesilij

[mihal64]

immo vw emo works.

[stevan]

you test it?

[gerass]

An other one. Not tested yet

[kowalwalcz]

im*o vw emo works.

works ?? without bin file ??
thats only pdf with scheme :stupido3:

[sevm]

Not tested

[gokifly]

somebody tested this ????
thanks

[milzal]

immo vw emo works.

Do you can upload dump for this schema, or in my email ? Fuse i will test, but without dump is not possible.

[Krotov_FSB]

single-side board working 100%

[Pali33]

which emulator version have you tested?
Many thanks in advance.

[Ludovik]

Krotov_FSB, I have the same factory board ))) which I ordered for myself. Are you from Bel.?

[Palladys]

I have it on AT89C2051 and I will try upload it.
It is checked and used from many time

[Palladys]

Dump for AT89C2051 and orginal PCB of VagImmoEmulator is here :
http://palladys.strefa.pl/VAG_Emulator.rar
I have not found schematic ( it is old project ), but it is easy and without problem you will read and redraw from PCB.
It work without any problem with all immo1 and 2.
Q is 11.0592MHz, led for info ( blocked / unblocked ).
You can modify the schema - it working in various configurations.

If it will be useful - I will upload others emulators.
This market is killed ( by e...5 and others ).
Use and be glad for free.

[bugajewski_pl]

Dump for AT89C2051 and orginal PCB of VagImmoEmulator is here :
http://palladys.strefa.pl/VAG_Emulator.rar


File is password-protected ??

[Palladys]

PL - as always first :)
Password is easy : Palladys

[bugajewski_pl]

Thank you, it will be what to do on Monday with morning coffee :-)

[rkaton12]

dzieki kolego a moze masz cos do fiata ?

[rkaton12]

I confirm that the emulator runs just cutted and
I tested a pity that there is no diagnosis due to:party:

[FSA740]

Thanks for emulator.

[aaruncee]

Dump for AT89C2051 and orginal PCB of VagImmoEmulator is here :
http://palladys.strefa.pl/VAG_Emulator.rar
I have not found schematic ( it is old project ), but it is easy and without problem you will read and redraw from PCB.
It work without any problem with all immo1 and 2.
Q is 11.0592MHz, led for info ( blocked / unblocked ).
You can modify the schema - it working in various configurations.

If it will be useful - I will upload others emulators.
This market is killed ( by e...5 and others ).
Use and be glad for free.

Who knows all parts of this emulator?

[Pali33]

If it will be useful - I will upload others emulators.
This market is killed ( by e...5 and others ).
Use and be glad for free.
yes, it is usefull. Please upload more tested emulators.
Many thanks in advance.

[aaruncee]

Dump for AT89C2051 and orginal PCB of VagImmoEmulator is here :
http://palladys.strefa.pl/VAG_Emulator.rar
I have not found schematic ( it is old project ), but it is easy and without problem you will read and redraw from PCB.
It work without any problem with all immo1 and 2.
Q is 11.0592MHz, led for info ( blocked / unblocked ).
You can modify the schema - it working in various configurations.

If it will be useful - I will upload others emulators.
This market is killed ( by e...5 and others ).
Use and be glad for free.

Need info about parts

thanks

[Pali33]

Need info about parts
i too, especially what is the little 3-pins part between R1 and R4. Is this transistor or diode? What typ?
Thanks

[Palladys]

i too, especially what is the little 3-pins part between R1 and R4. Is this transistor or diode? What typ?
Thanks

NPN transistor

[Krotov_FSB]

Krotov_FSB, I have the same factory board ))) which I ordered for myself. Are you from Bel.?

:^) yes I'm from Bel.

[Pali33]

How works this emulator?
Is needed virgin ECU, as by Renaul emulator? Or is needed diagnostic tool?

[fanos]

Schematic :360710
http://www.transpondery.com/projects/vag-immo-emulator.html

[Jungbest]

Long, long time ago I bought a lot PCB plates for it ( exactly these as on photo on transpondery.com (http://transpondery.com/projects/vag-immo-emulator.html) ).
I have also somewhere PCB for Mercedes CR1 and CR2 and PCB from some others immo emulators.
If someone would need it - write me pm ( I have only PCB - not emulators ).

[cristion]

how are capacitors C1 and C2http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365921&d=1458911082&thumb=1 (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365921&d=1458911082)http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365922&d=1458911094&thumb=1 (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365922&d=1458911094), vw golf 1.4 1998 ecu marelli iaw4av.v0 and dash 1j0919860 MM0 this emulator is good?

[henryxp]

try this to see if it works

https://www.drive2.com/l/3115992

[henryxp]

Is it possible to exclude the immobilizer via OBD port service?

[eric paris]

hello,
if the capacitors are for the crystal quartz try 22 pf for example



how are capacitors C1 and C2http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365921&d=1458911082&thumb=1 (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365921&d=1458911082)http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365922&d=1458911094&thumb=1 (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=365922&d=1458911094), vw golf 1.4 1998 ecu marelli iaw4av.v0 and dash 1j0919860 MM0 this emulator is good?

[henryxp]

it works this immo?