View Full Version : Land Rover Discovery 3 TDV6 (EU4) SID204, EGR off
tnevs
6th June, 2016, 07:19 PM
Hi,
my first serious post, here it goes :)
I have Land Rover Discovery 3 TDV6 HSE with EU4 engine and the guy who sold it suggested he can blank EGR. He didnt know that from 2008 (eu4 engine) its not that simple, you have to also modify ECU. So I keep getting limp mode (P0402) from time to time: I wanted EGR off anyway and since I have FGTech I managed to read in BDM mode SID204 unit nicely :)
379821
Problem is that I dont have damos for my read and any good/working software to modify it. So can anybody help me with my file and minimize EGR cycles?
Here is flash: xxx
baltazar3
6th June, 2016, 07:45 PM
Hi,
my first serious post, here it goes :)
I have Land Rover Discovery 3 TDV6 HSE with EU4 engine and the guy who sold it suggested he can blank EGR. He didnt know that from 2008 (eu4 engine) its not that simple, you have to also modify ECU. So I keep getting limp mode (P0402) from time to time: I wanted EGR off anyway and since I have FGTech I managed to read in BDM mode SID204 unit nicely :)
379821
Problem is that I dont have damos for my read and any good/working software to modify it. So can anybody help me with my file and minimize EGR cycles?
Here is flash:
379823
Here is....tested...allow tool to calculate chk....pm
tnevs
6th June, 2016, 09:13 PM
Yeah :) Wrote it back to ecu, FG calculated checksum nicely and temporarily connected ecu to vehicle to see if it start. It started :)
Thanks baltazar3
baltazar3
6th June, 2016, 09:36 PM
Yeah :) Wrote it back to ecu, FG calculated checksum nicely and temporarily connected ecu to vehicle to see if it start. It started :)
Thanks baltazar3
Also You have to diconnect EGR
tnevs
6th June, 2016, 09:44 PM
Also You have to diconnect EGR EGR is blocked with with plate. Do you mean I have to disconnect cables going to egr valve?
baltazar3
6th June, 2016, 09:57 PM
EGR is blocked with with plate. Do you mean I have to disconnect cables going to egr valve?
Yes unplug connector from EGR
tnevs
7th June, 2016, 04:26 PM
I pluged them back because then it engine light went on and then I got DTC P0405 error. Thing is that my EGR valves are actually okay, they were working fine, just to ensure long life for my engine we decided to blank them. Right now seems to be okay. :)
ROMER82
22nd June, 2017, 02:59 PM
Please... need pass for http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/rar.gif sid204ori_Flash-EGR-OFF-NO-CHK.rar (http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=379834&d=1465238724)
kimjongha
6th December, 2018, 01:36 PM
please ...i want pass
kimjongha
6th December, 2018, 01:36 PM
please .. i want pass
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.