PDA

View Full Version : Info for galletto users


kospoz
10th June, 2016, 05:40 PM
For people who using galletto v54 and have problems with bdm function you must resolder the bdm pads on pcb and then bdm function will be alive again.
I had this problem and with this way i fixed it.
Also i am working on can line problem i will post the results.
javyb
10th June, 2016, 06:22 PM
Do you mean the 10 pin plug on galetto

Sent from my SM-G935F using Tapatalk
kospoz
10th June, 2016, 07:01 PM
Do you mean the 10 pin plug on galetto

Sent from my SM-G935F using Tapatalk

Yes this 10 pin plug
linu
10th June, 2016, 07:32 PM
China Fgtech poor welds
teamtuner
10th June, 2016, 07:34 PM
For people who using galletto v54 and have problems with bdm function you must resolder the bdm pads on pcb and then bdm function will be alive again.
I had this problem and with this way i fixed it.
Also i am working on can line problem i will post the results.
mate...do the rework posted by fantomel user...and your fgtech will be a bomb...there are solutions...do not need other researches
teerak2uk
10th June, 2016, 08:12 PM
mate...do the rework posted by fantomel user...and your fgtech will be a bomb...there are solutions...do not need other researches
Fantomel doesn't mention a problem with this plug so is good when other members find problems and bring it to the forum.